VI-J1M-IY-F1

Current - Output (Max):	5A
Base Part Number:	VI-J1M
Size / Dimension:	2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	10V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC to DC converters are electronic devices that convert an input voltage to a different output voltage. They work by using an inductor, a current source (usually a MOSFET), a diode, and two capacitors to step up, step down, or invert the input voltage. This type of device is commonly used in communications, power supplies, and battery charging applications.One particular type of DC to DC converter is the VI-J1M-IY-F1. This device is designed to convert an input voltage between 8 and 16 volts to an output voltage of 24 volts, which makes it useful for many applications including charging batteries, powering microprocessors, and providing power in industrial control systems.The VI-J1M-IY-F1 works by taking the input voltage and increasing it through a series of switches. The devices uses two switches, called a buck and a boost switch, to control the output voltage. The buck switch decreases the input voltage and increases the output voltage, while the boost switch does the opposite.The process starts with an inductor, which works like a coil of wire to store energy and help regulate the output voltage. As the input voltage goes up and down, the inductor helps to maintain a more consistent output voltage. The current source, usually a MOSFET, is then used to turn on and off the buck and boost switches. As the input voltage changes, the current source will adjust the switches accordingly to maintain the desired output voltage. Finally, a diode and two capacitors are used to remove any electrical noise and smooth out the output voltage.The VI-J1M-IY-F1 has a typical efficiency of 96% and can handle an input current of up to 8 amps. It is also designed to handle power surges of up to 40%. It is an excellent choice for controlling the output voltage of portable electronic devices, motors, and industrial control systems. In conclusion, the VI-J1M-IY-F1 is an effective DC DC converter designed to step up or step down an input voltage between 8 and 16 volts to an output voltage of 24 volts. It uses a series of switches, an inductor, a current source, a diode, and two capacitors to convert the input voltage and maintain a consistent output voltage. It also provides excellent efficiency, power surge protection, and can handle up to 8 amps of current. The VI-J1M-IY-F1 is a great choice for many power supply and battery charging applications.

The specific data is subject to PDF, and the above content is for reference