VI-J1P-MY-S

Current - Output (Max):	3.62A
Base Part Number:	VI-J1P
Size / Dimension:	2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	13.8V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters: VI-J1P-MY-S Application Field and Working Principle

DC to DC converters, also known as DC DC converters, are devices that convert electrical power from one DC source to another. The VI-J1P-MY-S is a DC DC converter from Vicor that delivers power from 12V to 48V. This product is ideal for a wide range of applications where 12V, 24V or 48V DC power is required to power sensitive electronic components. The VI-J1P-MY-S is a high efficiency, semi-regulated converter with an operating temperature range of -40°C to +70°C.The VI-J1P-MY-S uses switching technologies and circuit designs which convert one DC input voltage to another output voltage. The DC DC converter is capable of operating in the constant voltage mode or the constant current mode depending on the application. The design of the VI-J1P-MY-S ensures minimal power losses, making it particularly suitable for applications where efficiency is critical.In the constant voltage mode, the output voltage of the VI-J1P-MY-S is determined by the input voltage. The maximum output voltage of the converter is determined by an internal OCP based on the current sense measure. The VI-J1P-MY-S is able to drive a load of up to 2A. The VI-J1P-MY-S also has an OVP feature which stops the output voltage from exceeding the set limit.In the constant current mode, the output voltage is determined by the current sense resistor set by the user. When the output current is less than the set limit, then the output voltage will be lower than the input voltage. The VI-J1P-MY-S has an over temperature protection (OTP) feature which will reduce the output current if the internal temperature of the device exceeds a certain value.The VIII-J1P-MY-S is a highly reliable device that is ideal for a wide range of applications. Due to its high efficiency and low noise output, it can be used in a variety of settings, including automotive, industrial and medical. Its miniature size allows it to be used in a wide range of applications, from small CCTV systems, to large automatic systems that require energy flexibility and low-noise operation.The VI-J1P-MY-S is also a cost-effective solution due to its high efficiency and compact size. It is also relatively easy to install with the required components provided. The VI-J1P-MY-S is pre-programmed with a set output voltage, but the voltage can be adjusted through the digital interface. This makes the device easy to use and gives it more flexibility.Overall, the VI-J1P-MY-S is a high-performance, highly reliable DC DC converter designed to meet the needs of modern applications. It is built with advanced technology and features, making it suitable for a variety of applications. With a wide input voltage range, the VI-J1P-MY-S is able to meet the requirements of different applications. The versatility of the VI-J1P-MY-S and its high efficiency makes it ideal for applications that require energy flexibility and low-noise operation. Its compact size and cost-effective nature make the VI-J1P-MY-S a good option for various applications.

The specific data is subject to PDF, and the above content is for reference