| Allicdata Part #: | VI-J3H-EW-S-ND |
| Manufacturer Part#: |
VI-J3H-EW-S |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 52V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 52V 1.... |
| DataSheet: |  VI-J3H-EW-S Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.92A |
| Base Part Number: | VI-J3H |
| Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 52V |
| Voltage - Input (Max): | 60V |
| Voltage - Input (Min): | 42V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC Converters
DC-DC converters are devices used to convert a direct current (DC) voltage from one value to another. These converters can transfer power from one DC source to another, or from a DC source to an AC source. They are used in a variety of applications, from onboard motor control systems to automotive power systems. There are a few different types of DC-DC converters, each with their own set of features and applications. One of the most commonly used DC-DC converters is the VI-J3H-EW-S converter.
The VI-J3H-EW-S Converter
The VI-J3H-EW-S converter is a high-efficiency, low-noise, isolated DC-DC converter with a wide range of input and output voltages. It is designed with special features that enable it to be used in a variety of applications. It is an ideal choice for small and medium motors, actuators, and other small and medium DC power systems. It is also used in the development of industrial power supplies and power management systems.
Application Field
The VI-J3H-EW-S converter is an ideal choice for small and medium motor and actuator control systems, as it has a wide range of input and output voltages. This makes it suitable for applications that require a precise voltage control. It is also suitable for mobile and industrial power supplies, as it is highly efficient, low noise, and isolated from the DC source. This makes it ideal for applications that require a reliable and stable power supply.
Working Principle
The VI-J3H-EW-S converter works on a simple principle. It takes power from a DC source, such as a battery, and converts it to a different voltage, usually a higher or lower voltage than the source. The voltage conversion is done through a switching mechanism, where the input and output voltages are switched on and off at a certain frequency. This is done using transistors, which act as switches and allow the energy to be converted from one voltage to another.
The VI-J3H-EW-S converter is designed with a wide range of input and output voltages, making it suitable for a variety of applications. It is also highly efficient, low noise, and isolated from the DC source, making it ideal for applications requiring a reliable and stable power supply.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...