VI-J43-MX-F2

Current - Output (Max):	3.13A
Base Part Number:	VI-J43
Size / Dimension:	2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input (Max):	100V
Voltage - Input (Min):	55V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to VI-J43-MX-F2 DC DC Converters

DC DC converters convert direct current (DC) from one voltage level to another, and are essential for maintaining power supplies from batteries or other sources of power. DC DC converters are a type of power conversion equipment used in many different applications, from telecommunications and military applications to industrial robotics, datacenters, and much more. The VI-J43-MX-F2 is a type of DC DC converter designed to meet a high degree of performance and reliability while providing up to 95 percent efficiency.

Applications of VI-J43-MX-F2 DC DC Converter

The VI-J43-MX-F2 is designed for use in many applications where reliable DC power conversion is required. It is typically used in aviation, medical, and military applications, where robust design and high efficiency are paramount. It is also used in industrial automation, solar power systems, and embedded systems. Additionally, it is suitable for use in telecommunications, datacenters, and other areas where a high degree of power reliability is essential.

Working Principle of VI-J43-MX-F2 DC DC Converter

The VI-J43-MX-F2 is a fully-regulated DC DC converter with a built-in over-voltage protection and short-circuit protection. It runs on fourth-generation wide-bandgap insulated-gate bipolar transistors, which are both efficient and safe. The working principle of the VI-J43-MX-F2 is very simple to understand. In a nutshell, it takes a DC input voltage, converts it to a different voltage, and passes it out as a clean and stable DC output. This type of converter is a two-stage DC power converter, in which a high voltage DC input is first transformed to an intermediate AC voltage, and then converted back to a low voltage DC output.The VI-J43-MX-F2 works by using two main stages of power conversion. The first stage is the AC-DC conversion. This converts a high voltage AC input to a low voltage DC output. The AC current is rectified at the input of the converter, using an array of Schottky diodes and a simple three-terminal bridge diode circuit. The second stage is the DC-DC conversion, which converts the low voltage DC output to a higher voltage DC output. This process begins with the insertion of a switching transistor which connects and disconnects the input and output, generating short pulses of voltage. These pulses are then amplified in a voltage multiplier circuit, and the resulting voltage is then rectified by a diode bridge.The VI-J43-MX-F2 DC DC converter is designed for applications where reliable power conversion is critical. It is capable of providing up to 95 percent efficiency, making it an excellent choice for applications where power consumption is a factor. Additionally, its simple and robust design ensures reliability, and its built-in protection circuits prevent damage due to over-voltage and short-circuiting. The VI-J43-MX-F2 is a great choice for aerospace, automotive, and industrial applications, as well as for any situation where reliable power conversion is needed.

The specific data is subject to PDF, and the above content is for reference