| Allicdata Part #: | VI-J4H-EW-F3-ND |
| Manufacturer Part#: |
VI-J4H-EW-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 52V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 52V 1.... |
| DataSheet: |  VI-J4H-EW-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.92A |
| Base Part Number: | VI-J4H |
| Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 52V |
| Voltage - Input (Max): | 100V |
| Voltage - Input (Min): | 55V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic circuits that are designed to convert one form of direct current (DC) power to another. The VI-J4H-EW-F3 is an example of such a converter. It is a single stage, wide input range, bidirectional, scalable high-efficiency DC-DC converter. It is typically used to convert a high voltage DC input into a lower voltage DC output. This makes it suitable for a variety of applications, such as power supply, high voltage system, high voltage battery packs, high voltage cable termination, and aerospace applications.
The VI-J4H-EW-F3 is designed to operate from a wide input voltage range of 4.5V to 34V, with an output voltage setpoint range of up to 26V. It is also capable of withstanding reverse polarity, transient spikes, and ESD strikes, as well as high temperatures. It is a highly efficient, reliable, and cost-effective solution for DC-DC conversion.
The VI-J4H-EW-F3 is based on a two-phase, full bridge, buck-boost regulator topology. This topology is great for providing high efficiency at wide input and output voltage ranges. The device is also equipped with advanced protection features, such as overvoltage protection, undervoltage protection, short circuit protection, and thermal shutdown.
The VI-J4H-EW-F3 can be used in a variety of applications where the exact output voltage range and efficiency are critical. For example, it can be used in power supply applications, where low ripple and jitter are also required. It can also be employed in high-voltage battery packs or for high-voltage system termination. Furthermore, the VI-J4H-EW-F3 can be used in aerospace applications, such as aircraft and spacecraft.
In conclusion, the VI-J4H-EW-F3 is an efficient and cost-effective solution for DC-DC conversion. It offers a wide input voltage range of 4.5V - 34V and an output voltage setpoint range of up to 26V. It has advanced protection features, such as overvoltage protection, undervoltage protection, short circuit protection, and thermal shutdown. It is suitable for a variety of applications, such as power supply, high voltage system, high voltage battery packs, high voltage cable termination, and aerospace applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...