VI-J4J-EY-F1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are devices used to convert electrical energy from one form to another, usually from a direct current energy source to another form of direct current energy source. The VI-J4J-EY-F1 is a type of DC-DC converter, specifically an intermediate-voltage DC-DC converter, and is utilized for a range of applications. In its most common arrangement, this configuration requires only a single transformer and two switching transistors, which allow for the conversion of intermediate levels of current or voltage from a lower DC voltage source to a higher DC voltage source.

The VI-J4J-EY-F1 is tailored for applications that require voltage conversion from low voltage or medium voltage sources to inverter or lighting loads for air conditioning, motors, computers, and industrial automation. The power-efficient device also supports a wide range of operating temperatures, with an input range of -20 to 80° C and an output range of -20 to 85° C. It also features a lightweight and slim design that suits portable applications or applications with limited space.

The VI-J4J-EY-F1 works on the principle of voltage transformation via switching transistors. In all DC-DC transformer-based devices, a transformer is the main component and is used to increase or decrease the voltage and current. The VI-J4J-EY-F1 uses a transformer that contains two windings: a primary winding and a secondary winding. The primary winding is connected to the input voltage and the secondary winding is connected to the output voltage. The transformer transmits energy between the two windings, and is responsible for changing the voltage and current levels between the input and the output.

The two power switching transistors, which are connected in a series with the transformer, allow for bidirectional power conversion. The transistors in the VI-J4J-EY-F1 alternately switch on and off, while operating at a frequency of up to 30 kHz, to allow the input current and voltage to flow through the transformer. The resulting change in current and voltage is changed at the output side. This type of converter then converts the direct current form the input to a rated output voltage that is usually higher than the input voltage. This energy conversion is done with less than a 5% loss of efficiency in most applications.

The VI-J4J-EY-F1 also provides added functionality with its built-in protection and monitoring capabilities. The device provides over-temperature protection, overload protection, over-voltage protection, and input under-voltage protection to guard against damage to both the converter and connected devices. Additionally, the VI-J4J-EY-F1 provides a digital input for monitoring the input voltage and output voltage, as well as short-circuit protection.

The VI-J4J-EY-F1 is a reliable, energy efficient, and feature-rich DC-DC converter. Its use of transformers and power switching transistors for voltage transformation makes it ideal for intermediate voltage applications, as well as for applications where space is at a premium. With its many added features, the VI-J4J-EY-F1 is one of the most advanced devices available for converting direct current from one voltage level to another.

The specific data is subject to PDF, and the above content is for reference