VI-J4M-CX-F3

Current - Output (Max):	7.5A
Base Part Number:	VI-J4M
Size / Dimension:	2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	10V
Voltage - Input (Max):	100V
Voltage - Input (Min):	55V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are devices utilized to change the voltage of unregulated DC as a source into a regulated DC output voltage. It is mainly utilized in applications where power is delivered at a regulated level for the operation of a specific circuit protected from the variations in the input voltage source.The VI-J4M-CX-F3 DC DC converter is one of the most popular converters available. This is a high performance full bridge power converter, capable of performing at extremely high power efficiency, with the capability to reduce the output ripple to a negligible level. It is mainly utilized in various sectors such as audio/video equipment, instrumentation, military/aerospace, motor control and power supplies applications. It is also widely used in consumer electronic applications and in the automotive sector, being able to offer reliable and reliable high performance operation.The main components of a VI-J4M-CX-F3 DC DC converter includes a transformer, two diodes, and two transistors. It is a four stage converter that makes use of two secondary windings to provide two outputs voltages. The transformer is responsible for transforming the input voltage to the optimum operating voltage of the converter. The two diodes are used to rectify the AC output of the transformer and provide a DC output. The two transistors then switch the rectified voltage and convert it into variable output voltages.The working principle of a VI-J4M-CX-F3 DC DC converter is similar to the operation of a Phase-Locked Loop (PLL) converter. When the input voltage is applied, the transformer divides the incoming voltage into two outputs, one with higher voltage and another with lower voltage. These two windings are then subjected to a high frequency switching which is managed by the integrated controller of the converter. During the switching, transistors are turned on and off at precise intervals so as to produce a varying output voltage.The VI-J4M-CX-F3 DC DC converter is capable of providing two independent outputs and providing excellent performance in high power efficiency, low ripple, high speed, and high stability. It can even be configured to operate in different modes such as constant voltage, constant current, or constant power mode. Furthermore, it can also be configured for various output voltage and current ranges for maximum accuracy.Moreover, with the built in soft-start feature, it is able to protect systems against in-rush current and it also adds certain protective measures to prevent any damages against over-voltage, overload, and short circuit failures. It is also highly reliable and is capable of maintaining a high degree of accuracy even in harsh environmental conditions.Overall, the VI-J4M-CX-F3 DC DC converter is a high performance full bridge converter, capable of delivering reliable and efficient operation in a variety of applications. It is easy to use and configure and is ideal for those who need high power efficiency, low ripple, high speed, and high stability.

The specific data is subject to PDF, and the above content is for reference