| Allicdata Part #: | VI-J4Z-IY-F2-ND |
| Manufacturer Part#: |
VI-J4Z-IY-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 2V 20W |
| More Detail: | Isolated Module DC DC Converter 1 Output 2V 10A... |
| DataSheet: |  VI-J4Z-IY-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
Specifications
| Current - Output (Max): | 10A |
| Base Part Number: | VI-J4Z |
| Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 20W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 2V |
| Voltage - Input (Max): | 100V |
| Voltage - Input (Min): | 55V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electronic components used to convert a direct current (DC) voltage from one level to another level. A DC DC converter is also known as a voltage regulator, and it is an electronic device that converts a DC voltage into a different DC voltage. The VI-J4Z-IY-F2 DC DC converter is an integrated device that is designed to convert an input voltage to a higher or lower output voltage. The VI-J4Z-IY-F2 is designed to work at low input voltages and provides a regulated output voltage even with changes in the input voltage. Applications and Working Principle of the VI-J4Z-IY-F2 DC DC ConverterThe VI-J4Z-IY-F2 DC-DC converter is used in a variety of applications, including power electronics, automation, and control. This converter provides an efficient and reliable power source for a wide range of applications, such as electric vehicles, solar energy systems, and home automation. The VI-J4Z-IY-F2 is also commonly used in medical products and industrial electronic systems.
The VI-J4Z-IY-F2 DC-DC converter uses a full-bridge topology to convert the input voltage to the desired output voltage. This converter uses a switching technique, meaning the switches are turned on and off to achieve the desired output voltage. The switches are driven by a high-frequency pulse-width modulator (PWM) that regulates the average output voltage. The PWM operates at a high frequency, typically 1kHz to 20kHz, depending on the components used.
The VI-J4Z-IY-F2 DDC-DC converter is equipped with a control circuit that monitors the input and output voltage. If the input voltage drops below the desired level, or the output voltage exceeds the set point, the control circuit will activate a switch to regulate the output voltage. This ensures the output voltage remains stable, even if the input voltage changes.
The VI-J4Z-IY-F2 DC-DC converter is also equipped with a protection circuit to protect the device from damage due to overload, over temperature, or short circuit. This protection circuit will trip and shut down the converter if it detects a fault or problem. This ensures the converter won’t be damaged, and that the user’s equipment is safe.
The VI-J4Z-IY-F2 DC-DC converter is a reliable and cost-effective solution for powering a variety of devices. It can be used in applications where a precise, consistent output voltage is required. This converter can be used to prevent voltage drops which can cause instability and even equipment damage. By providing a reliable, consistent output voltage, the VI-J4Z-IY-F2 ensures the user’s equipment will run optimally without any risk of damage or loss of performance.
The specific data is subject to PDF, and the above content is for reference
Latest Products
AEQ20B48N-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEO40Y48N-6L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-6L
DC DC CONVERTER 1.8V 120WIsolated Module...