Allicdata Part #: | VI-J50-IX-F3-ND |
Manufacturer Part#: |
VI-J50-IX-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 5V 15A... |
DataSheet: | VI-J50-IX-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 15A |
Base Part Number: | VI-J50 |
Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.DC DC converters are electronic devices used to convert a DC voltage from one level to another. The VI-J50-IX-F3 is a DC DC converter that is capable of converting input DC voltage levels ranging from 9 to 50 volts to a regulated 9 volts output at up to 3.6 Amps. This makes it ideal for powering various types of electronic equipment such as embedded systems, radio systems, industrial controllers, and telecommunications equipment.
The VI-J50-IX-F3 is a type of DC DC converter called an isolated flyback converter. This type of converter uses a transformer to separate the input and output side, thus isolating them from each other. The primary side of the transformer is connected to the input DC source, while the secondary side is connected to the output devices via a diode bridge. The input voltage is rectified by the diode bridge and then applied to the transformer primary side winding. This causes a current to flow through the primary side, which produces a magnetic flux in the transformer primary coil that drives the secondary side.
The output voltage from the transformer is rectified by another diode bridge connected to the secondary side of the transformer. This produces a pulsating DC voltage that is then filtered by a capacitor and regulated to the desired output voltage level by the integrated voltage regulator. The regulator is also used to limit the maximum current draw of the system to the required level.
The VI-J50-IX-F3 DC DC converter is used in a variety of applications. It can be used to power embedded systems, radio, communications, industrial controller, and telecommunication equipment. It can also be used to power sensors, automotive accessories such as lights and car audios, and small motors. It is a reliable and cost-effective solution for powering electronic equipment.
The VI-J50-IX-F3 DC DC converter has been designed with high efficiency and low noise in mind. It is capable of converting input DC voltage levels up to 50 volts with a regulated output of 9 volts and a maximum current draw of 3.6 Amps. The high efficiency and low noise make it ideal for powering sensitive electronic equipment such as telecommunications systems. The integrated voltage regulator is also useful in ensuring that the device operates within the required parameters.
In conclusion, the VI-J50-IX-F3 DC DC converter is a reliable and cost-effective solution for powering a variety of electronic equipment. Its high efficiency and low noise make it suitable for use in sensitive applications such as telecommunications systems. It is also useful for powering automotive accessories and small motors. The integrated voltage regulator helps to ensure that the device operates within the desired parameters.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...