Allicdata Part #: | VI-J50-MX-F3-ND |
Manufacturer Part#: |
VI-J50-MX-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 5V 15A... |
DataSheet: | VI-J50-MX-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 15A |
Base Part Number: | VI-J50 |
Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC/DC converters, such as the VI-J50-MX-F3, are used to convert a direct current (DC) into another DC voltage. The converter can step down, step up, or invert the voltage of the input. These DC/DC converters can be used in a wide range of applications, from small circuits to large systems.
The VI-J50-MX-F3 DC/DC converter is a full-bridge converter specifically designed for DC-DC applications. The full-bridge converter can control the voltage from the input supply and provide a circuit with a high power transfer efficiency. The full-bridge topology offers a wide range of adjustable operating frequencies, making it suitable for a variety of applications.
The working principle behind the VI-J50-MX-F3 is simple. The device has two power transistors that work together to convert the input voltage into a regulated output voltage. The way it works is that when the input voltage is greater than the desired output voltage, one transistor is turned on while the other is turned off, which converts the input voltage into the synchronous output. When the input voltage is lower than the output, the transistors switch so that the other transistor is turned on while the first transistor is turned off, converting the input voltage into an asynchronous output.
The VI-J50-MX-F3 is highly versatile and can be used in a variety of applications, from automotive to renewable energy. It is commonly used in vehicles to convert the 12V/24V battery voltage into a 13.2V DC output to power electronic systems and devices. This makes it ideal for powering up an array of devices, such as navigation systems and other electronic accessories. Other applications include renewable energy systems, such as solar and wind, telecommunication systems, medical systems, and robotics.
The VI-J50-MX-F3 is an excellent choice for applications where space and cost are a concern since it is relatively small and affordable. This converter features adjustable switching frequency, low output ripple, and a wide input voltage range, making it a reliable and cost-effective choice.
The VI-J50-MX-F3 DC/DC converter is an efficient and reliable solution for applications that require a reliable source of power. It is easy to install and use, allowing for a wide range of applications while also providing a cost-effective and energy-efficient power solution.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...