| Allicdata Part #: | VI-J5M-CZ-F1-ND |
| Manufacturer Part#: |
VI-J5M-CZ-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 10V 25W |
| More Detail: | Isolated Module DC DC Converter 1 Output 10V 2.... |
| DataSheet: |  VI-J5M-CZ-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.5A |
| Base Part Number: | VI-J5M |
| Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 25W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 10V |
| Voltage - Input (Max): | 200V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC-DC converters are electrical switches that act as electric interfaces between two circuits. They are mainly used to convert electrical power from one voltage level to another, or change the frequency of an alternating voltage. The VI-J5M-CZ-F1 is a type of DC-DC converter that is designed to provide stable and reliable power conversion to a variety of electronics applications.
Application Field
The VI-J5M-CZ-F1 DC-DC converter is suitable for use in a variety of applications, including mobile phones, tablets, industrial/measurement equipment, and automotive applications. This type of converter can be used for a variety of voltage and current ranges, and is capable of providing reliable and stable output voltages in the degree of 1%. It is also designed to be adaptable for a wide range of input voltages, making it suitable for a range of electronics products.
Working Principle
The working principle of the VI-J5M-CZ-F1 DC-DC converter is based on a switching converter circuit. This circuit uses an electronic switching device, such as a MOSFET, to switch between an input voltage and an output voltage. The switching device is controlled by an external controller, which modulates the switch frequency in order to produce a stable output voltage. The converter is designed to reduce the level of noise and ripple, while also providing a higher output voltage stability compared to linear regulators. The converter is also designed to provide a high degree of efficiency despite being regulated by an external control source.
Conclusion
The VI-J5M-CZ-F1 DC-DC converter is a reliable and stable power converter, which is suitable for a variety of electronics applications. Its switching converter circuit uses an electronic switching device to switch between the input and output voltages, and it is controlled by an external controller. The converter is designed to provide high levels of efficiency, stability, and noise reduction. As such, it is an ideal solution for a wide range of electronics products.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...