| Allicdata Part #: | VI-J5M-EW-F2-ND |
| Manufacturer Part#: |
VI-J5M-EW-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 10V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 10V 10... |
| DataSheet: |  VI-J5M-EW-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 10A |
| Base Part Number: | VI-J5M |
| Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 10V |
| Voltage - Input (Max): | 200V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are devices that can convert direct current (DC) to a different dc voltage. The VI-J5M-EW-F2 is a type of DC to DC converter. It is used to convert between voltages that are not the same. It is also known as a dc voltage regulator.
The VI-J5M-EW-F2 converter is a low-loss and high efficiency DC-DC converter that has a voltage range of 10-36 volts. It can provide an output voltage up to 30 volts and can handle up to 10 amps of current. The device also features an adjustable output voltage, fast transient response, and a low output ripple voltage to ensure a stable output voltage.
The VI-J5M-EW-F2 is mainly used in automotive and marine applications. It is used to convert and regulate the voltages between the battery and the onboard electrical system. It can be used to control the power of a motor, the charging of a battery, and the power of an electronic device.
The converter is also used in industrial applications where a stable DC power supply is required. It is also used in renewable energy systems such as solar and wind power systems, where a stable voltage is needed to drive the turbines, inverters and other equipment.
The VI-J5M-EW-F2 converter works by taking input direct current from a source and converting it into output regulated direct current. The device uses pulse width modulation (PWM) to regulate the output voltage. PWM is a technique that controls the on/off states of a switch and is used to control the voltage and current output of a DC-DC converter.
The VI-J5M-EW-F2 also features a wide operating temperature range, which allows it to be used in both hot and cold climates. It is also designed with a built-in protection circuit to protect the output from overloads and overvoltages.
The VI-J5M-EW-F2 is a reliable, high-efficiency DC-DC converter that offers a wide range of applications, including automotive, marine and industrial applications. Its ability to provide a stable output voltage, as well as its fast transient response makes it ideal for applications where voltage regulation is necessary.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...