VI-J60-MY-S

Current - Output (Max):	10A
Base Part Number:	VI-J60
Size / Dimension:	2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	400V
Voltage - Input (Min):	200V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are an integral part of many modern electronic devices. They are responsible for changing the voltage from one level to another, thus allowing devices to operate on different amounts of power. The VI-J60-MY-S converter is a highly efficient DC-DC converter, achieving 90% load efficiency. This makes it a popular choice in many fields of technology.

Application Field

The VI-J60-MY-S converter is designed primarily for use in telecom and power systems where regulated power is needed. Telecom systems include telephone exchanges, computer networks, and mobile phone chargers. Power systems include electric vehicles, solar energy systems, and back-up power sources. Its high efficiency makes it a great fit for these applications, as it can make the most of the available power while reducing the cost of powering the system.

Working Principle

The VI-J60-MY-S converter works by converting AC power into DC power of a different voltage. This is done by using a transformer to step down the AC voltage, then a rectifier to convert it to a DC voltage. The converted voltage is then filtered to remove any remaining AC frequencies. Finally, an output stages produces the desired output voltage.The VI-J60-MY-S converter is an efficient DC-DC converter, due to its use of synchronous rectification and active clamp ZVS/ZCD technology. This allows it to achieve full load efficiency of up to 90%. It also uses low standby power, up to 51% lower than other similar converters, further reducing its energy consumption.

Safety Features

The VI-J60-MY-S converter is designed with safety in mind. It comes with built-in protections against over-voltage, over-current, and short-circuit protection. This ensures that the converter can keep the output voltage within safe limits, even in the event of a fault in the system. The converter can also be manually shut down, in case of an emergency or system failure, making it a safe and reliable choice for many applications.

Conclusion

The VI-J60-MY-S converter is an efficient and reliable solution for telecom and power systems. It can achieve high load efficiency due to its synchronous rectification and active clamp ZVS/ZCD technology, as well as low standby power consumption. It also provides effective protection against faults in the system, making it a safe and dependable choice.

The specific data is subject to PDF, and the above content is for reference