VI-J6J-CX-F1

Current - Output (Max):	2.08A
Base Part Number:	VI-J6J
Size / Dimension:	2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	36V
Voltage - Input (Max):	400V
Voltage - Input (Min):	200V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters: VI-J6J-CX-F1 Application Field and Working Principle

DC DC converters are widely used in a variety of industries, from mobile devices to industrial applications. The VI-J6J-CX-F1 has a wide range of applications due to its reliability and efficiency. This converter is designed for major voltage inputs and outputs, as well as current-limited inputs. Designed with a wide range of features, this component is ideal for applications requiring high output voltage and current as well as low-frequency input signals.The VI-J6J-CX-F1 is a low-cost, highly efficient, lightweight, and compact DC DC converter. It uses a pre-built capacitance-divider network on its input side and an integrated gate drive logic on its output side. This leads to very efficient power transmission between high and low voltage signals. This component has a very low internal resistance which means that it can produce high power outputs with little power loss.This converter consists of two parts, the main unit and the auxiliary unit. The main unit contains the transformer core, rectifying diodes, inductors, and capacitors, which make up the circuit. The auxiliary unit includes components such as MCUs and LEDs, which give the DC DC converter additional features. When the user activates the converter, a series of energy conversion processes occur.Firstly, the AC voltage from the power source is rectified, producing a DC signal. This DC signal is stepped down through a transformer, meaning the output power is lower than the input power. The input power is then processed through the other components, which are used to further reduce the voltage while also maintaining the current at a predetermined level.The DC signal is then sent to the MCU, which regulates the output current. The MCU uses PWM (pulse width modulation) to convert the DC signal into a digital code. This digital code is then sent to the integrated gate drive logic, which controls the output current.The output current is sent back to the transformer, which is used to convert the digital signal back into a DC current. Finally, the rectifying diode is used to convert the AC signal back to a DC signal, which can then be used as the output of the device.The VI-J6J-CX-F1 is designed with several safety features. It is designed to withstand high temperatures without deforming, and it also includes an overload protection system. This means that the converter will shut off if the output current is too high, protecting the device from damage. It also includes a surge protection system, which will detect any power surges and shut off the device if necessary.The VI-J6J-CX-F1 is an ideal converter for applications requiring high output voltage and current. It is reliable, lightweight, and compact, and it offers efficient power transmission and low internal resistance. Its safety features make it an ideal choice for any application.

The specific data is subject to PDF, and the above content is for reference