VI-J6T-EY-F1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are electronic power converters that convert a direct current (DC) power source from one voltage level to another voltage level. The VI-J6T-EY-F1 converter is a type of DC-DC converter, designed to convert a 12 V input voltage to an adjustable output voltage range of 5.5 V to 18 V. It uses heavy duty output MOSFETs to get a maximum output current of 5.6 A. The VI-J6T-EY-F1 DC-DC converter is suitable for applications such as portable electronics, telecommunications, industrial systems, automotive and medical equipment.

The VI-J6T-EY-F1 DC-DC converter is built with a step-down DC-DC converter topology. It is composed of an inductor/transformer, a high-side MOSFET, a diode and a low-side MOSFET. The primary side of the transformer has a winding ratio of 1:2, while the secondary side has a winding ratio of 2:1. The output voltage of the converter is controlled by adjusting the on-time of the high side MOSFET by using the adjustable frequency PWM signal.

In operation, the VI-J6T-EY-F1 DC-DC converter\'s primary side switch turns on when a PWM signal is applied to its gate. The pulse width modulation signal is configured to be adjustable and it can be varied from 10 kHz to 1.2 MHz. When the switch turns on, the input voltage is step-down to a desired level by the transformer winding ratio and is then rectified and filtered by the diode and capacitor before the output voltage is produced. When the PWM signal turns off, the current begins to decrease. The diode helps to make sure that the output voltage does not collapse and destroys the components when the primary switch turns off.

The PWM signal is adjusted in order to provide the desired output voltage. The output voltage can be varied from 5.5 V to 18 V. The maximum peak current for the output is 5.6 A and the maximum output power is 100 W. The output voltage is adjustable and regulated, providing excellent line and load regulation.

The VI-J6T-EY-F1 DC-DC converter is highly efficient, with typical efficiencies ranging from 88% to 95%. It has an adjustable frequency, adjustable dead time, adjustable output voltage, and a wide variety of protection features, such as over-current, over-temperature, and short-circuit protection.

The VI-J6T-EY-F1 DC-DC converter is ideal for use in a wide variety of applications, such as portable electronic devices, telecommunication systems, industrial control systems, automotive electronics and medical equipment.

The specific data is subject to PDF, and the above content is for reference