Allicdata Part #: | VI-J6Y-IW-F2-ND |
Manufacturer Part#: |
VI-J6Y-IW-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 3.3V 66W |
More Detail: | Isolated Module DC DC Converter 1 Output 3.3V 2... |
DataSheet: | VI-J6Y-IW-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 20A |
Base Part Number: | VI-J6Y |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 66W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 3.3V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 200V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC-DC Converters, or DC to DC converters, are electronic devices used to convert DC (direct current) power from one voltage level to another. They are commonly used to convert the output voltage of a power supply to a level suitable for the application at hand. They can also be used to regulate the amount of current being delivered to an a specific load, or to step up or step down the voltage for efficient storage or distribution of energy.
VI-J6Y-IW-F2 DC to DC converters are a type of electronic power conversion devices built with two stages. The first stage is typically used to rectify the input AC (alternating current) voltage and then it is smoothed by a large capacitor. The second stage, called the main conversion stage, is used to convert the rectified voltage to a different level.
Applications
VI-J6Y-IW-F2 DC-DC converters are used in a variety of applications, such as industrial applications, telecommunications, automotive, and consumer applications. In industrial applications, they are used to step down the input AC voltage levels to create a low DC voltage that can be used safely in the equipment and system. In telecommunications, they are used to regulate the high voltages used in transmission of signals over long distances and provide the necessary voltage conversion for wireless devices. Automotive applications use DC-DC converters to convert the battery voltage to a level suitable for the accessories in a vehicle. In consumer applications, they are used to convert mains AC voltage to the correct voltage needed to power gadgets like tablets, mobiles, and laptops.
Working Principle
VI-J6Y-IW-F2 DC-DC converters are a type of switch-mode power supply that works on the principle of pulse-width modulation (PWM). PWM is a technique used to convert the input DC voltage level from one voltage level to another by introducing fast switching action between the input voltage and ground, or between the input voltage and the output voltage. The duty cycle and frequency of the switching action can be adjusted to obtain the desired output voltage.
The switching action is performed by a power semiconductor device, like a MOSFET or IGBT. When the power switched is turned on, the MOSFET passes the input voltage to the load and the output voltage is generated. When the switch is turned off, the input voltage is disconnected from the load resulting in no output voltage.
The second stage is typically used to regulate the output voltage by controlling the duty cycle of the switching action. This type of converter is called a Control Mode Converter or a Voltage Mode Converter, depending on the type of control used. When a control mode converter is used, the output voltage is regulated by varying the on and off times of the power switched and adjusting the duty cycle. When a voltage mode converter is used, the output voltage is regulated by varying the duty cycle while keeping the on and off times of the power switch constant.
VI-J6Y-IW-F2 DC-DC converters are efficient and reliable power conversion devices used in a variety of applications. They are ideal for applications where there is a need to step up or step down a DC voltage level while maintaining a regulated output. They are also very efficient and dissipate very little heat, making them an ideal choice for energy-critical applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...