Allicdata Part #: | VI-J70-MZ-F1-ND |
Manufacturer Part#: |
VI-J70-MZ-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 5V 5A ... |
DataSheet: | VI-J70-MZ-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 5A |
Base Part Number: | VI-J70 |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5V |
Voltage - Input (Max): | 375V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC–DC converters, in simple terms, are a device which converts a direct current input voltage into a different direct current output voltage. In more technical terms, DC–DC converters are a type of power electronic circuit that changes the voltage of a DC input into a different output voltage. This is done using a number of different control methods and components, including transformers, rectifiers, diodes, transistors, capacitors, inductors, topologies, etc.
VI-J70-MZ-F1 is one of the DC-DC converters made by Delta Electronics. VI-J70-MZ-F1 is an isolated DC–DC converter with a super-wide 4.5:1 input range and offers a high efficiency up to 94%. It is also small (2.5” x 1.9” x 0.6”) and can provide an output power of 70Watt when air cooled. It is designed for various applications such as telecom, industrial control, solar energy, out door LED display screens, server power supplies, vehicle-mounted controllers, etc.
The working principle of VI-J70-MZ-F1 can be divided into three operational stages. The first stage is the input stage, which receives the input voltage and frequency from an AC supply and converts it into DC. This DC then passes through a rectifier bridge and a diode bridge to the output stage. In the output stage, the DC passes through a high frequency transformer and is converted into another DC voltage. In the third stage, the output voltage is stabilized by using a feedback system. This feedback system is then used to regulate and maintain the output voltage.
VI-J70-MZ-F1 has various advantages such as high efficiency, wide input range, low ripple, low noise, high power density, etc. It has an ultra-wide 4.5:1 input range that can accept an input voltage from 18V to 75V. It also has very low noise and ripple, which makes it suitable for sensitive loads. Other advantages include high efficiency of up to 94%, high power density, small size, and extended temperature range.
VI-J70-MZ-F1 is a good choice for many applications due to its wide input range, high efficiency, low noise, etc. It can be used in telecom, industrial control, solar energy, out door LED display screens, server power supplies, vehicle-mounted controllers, and many other applications. It is also a good choice for applications that require reliable and stable power such as medical and military applications. In conclusion, VI-J70-MZ-F1 is a good DC–DC converter that has many advantages and can be used in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...