VI-J74-IZ-B1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are used in a variety of applications to convert electrical energy from one DC signal to another. The VI-J74-IZ-B1 DC-DC converter is a highly efficient switch-mode power supply that is capable of converting a 12V DC input signal to up to a 6V output. It is designed to operate over a wide range of input and output voltages and is capable of delivering load currents of up to 2A.

The VI-J74-IZ-B1 DC-DC converter utilizes a buck topology, which is the most common DC-DC converter topology. This topology works by switching a higher voltage source into a smaller voltage sink. The switching is accomplished by means of a switching transistor or MOSFET. When the transistor is switched on, current is allowed to flow from the source to the sink. The voltage is then regulated by a feedback control circuit.

The VI-J74-IZ-B1 DC-DC converter utilizes a synchronous rectifier, which is triggered by a pulse-width modulated (PWM) signal. This pulse-width modulation is controlled by a feedback control circuit, which is based on a hysteresis comparator. The output voltage is regulated by comparing the output voltage to an internal reference voltage. If the output voltage is too high, the PWM signal is increased, while if it is too low, the PWM signal is decreased. The output voltage is also protected against short circuit and overvoltage by a series of protection circuits.

The VI-J74-IZ-B1 DC-DC converter is designed to operate with a wide range of input and output voltages and can deliver up to 2A load current. It also has a high switching frequency of up to 500kHz, which allows for a high efficiency. The VI-J74-IZ-B1 is well suited for applications such as medical equipment, industrial process control, and communications.

The VI-J74-IZ-B1 DC-DC converter is a highly efficient switch-mode power supply that is capable of providing a reliable power supply in a wide range of applications. It utilizes a buck topology and synchronous rectifier to achieve a high efficiency and supports a wide range of input and output voltages. It can deliver up to 2A load current with a switching frequency of up to 500kHz. The VI-J74-IZ-B1 is well suited for applications such as medical equipment, industrial process control, and communications.

The specific data is subject to PDF, and the above content is for reference