VI-JN3-EX-F3

Current - Output (Max):	3.13A
Base Part Number:	VI-JN3
Size / Dimension:	2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input (Max):	76V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are widely used in a variety of applications, from low voltage analog circuits to high voltage power electronics applications. The VI-JN3-EX-F3 is a type of DC-DC converter typically used in industrial applications. This article will discuss the application field and working principle of the VI-JN3-EX-F3 DC-DC converter.The VI-JN3-EX-F3 is a compact, highly efficient, full-bridge resonant DC-DC converter. It can be used in various applications, such as motor drives, industrial automation, and power supplies. It is capable of providing up to 10A of output current and is moderately priced, making it an attractive option for many applications.The working principle of the VI-JN3-EX-F3 is based on a full-bridge topology. The topology is composed of four switches and two capacitors. When the power switch is activated, the two capacitor banks are connected in series and a voltage differential is created. This voltage differential is then used to drive an inductor, which creates a high-frequency oscillating signal. This oscillating signal is then used to drive the output stage of the converter. The output stage is a full-bridge rectifier, which converts the oscillating signal into the desired DC output voltage.The full-bridge rectifier topology used in the VI-JN3-EX-F3 offers many advantages over traditional half-bridge rectifier topologies. It is able to transfer more power with higher efficiency and is more robust than traditional half-bridge configurations. Moreover, the full-bridge topology is more tolerant to changes in the load, as it is able to operate at lower line and load conditions with reduced voltage and frequency drops. This allows for more accurate output voltage control.The VI-JN3-EX-F3 is a reliable DC-DC converter, which can be used in a variety of applications. It is capable of providing up to 10A of output current with high efficiency and low noise. Moreover, its full-bridge rectifier topology is more efficient and robust than traditional half-bridge rectifier configurations. Thanks to these features, the VI-JN3-EX-F3 is often used in motor drives, industrial automation, and power supplies.

The specific data is subject to PDF, and the above content is for reference