| Allicdata Part #: | VI-JN3-IW-F4-ND |
| Manufacturer Part#: |
VI-JN3-IW-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 24V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 24V 4.... |
| DataSheet: |  VI-JN3-IW-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 4.17A |
| Base Part Number: | VI-JN3 |
| Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 24V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are a class of electronic circuits that convert direct current (DC) from one voltage level to another. The VI-JN3-IW-F4 is a type of DC-DC converter that can optimize voltage conversion efficiency, reduce power consumption, and improve reliability for a variety of applications. In this article, we will explore the applications and working principles of this specific converter.
Applications:VI-JN3-IW-F4 DC-DC converters are used widely in power electronics systems for the purpose of voltage conversion. They are used in medical and industrial applications, such as battery chargers, defibrillators, motor drives, and electric power systems. In addition, they are used in consumer electronics such as laptops, portable aesthetics devices, cameras, and other battery-powered devices. These converters can be used to convert voltage from low voltage (2V) up to high voltage (15V).
Working Principle:The working principle of the VI-JN3-IW-F4 DC-DC converter is based on a pulse width modulation (PWM) control topology. In this topology, an oscillator drives a switch that turns on and off according to a pre-determined duty cycle. The switch is connected to both the input and output of the converter. When the switch is on, energy is stored in the inductor and when the switch is off, the energy is released to the output. This process of transferring energy between the store and output is what allows for the conversion of voltage levels.
The converter also includes a voltage detection circuit to monitor the output and adjust the PWM duty cycle accordingly. This circuit ensures that the converter is always working in a safe operating area of the efficiency curve and providing an accurately regulated output voltage. Additionally, the VI-JN3-IW-F4 includes over-temperature and over-load protection to prevent damage to the converters and the connected devices.
The VI-JN3-IW-F4 DC-DC converter is designed to provide high efficiency, low power consumption, and reliable operation. It has been used in a variety of applications for converting voltage levels and is well-suited for medical, industrial, and consumer applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...