| Allicdata Part #: | VI-JN3-IX-S-ND |
| Manufacturer Part#: |
VI-JN3-IX-S |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 24V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 24V 3.... |
| DataSheet: |  VI-JN3-IX-S Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.13A |
| Base Part Number: | VI-JN3 |
| Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 24V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters can be used to provide power from a relatively low-voltage (typically 12V) source to a load at a relatively high voltage. They can be used for cooling, illumination, or other applications. The VI-JN3-IX-S is a specific type of DC-DC converter that is designed for applications that require a wide input range, high efficiency, and low output ripple noise.
The VI-JN3-IX-S has an input voltage range from 10 to 140 V, so it is suitable for use in a variety of industrial applications. It also has a wide temperature range of -40°C to 105°C, and it can handle load currents up to 15A. Three output voltages are available: 12, 24, and 36V.
The VI-JN3-IX-S uses a quasi-resonant current mode control circuit to achieve high efficiency and low output ripple noise. The converter is designed to reduce the turn-on/off delay, resulting in a fast transient response. It also utilizes synchronizing control technology to minimize the input current ripple. The converter is capable of operating in a wide range of operating frequencies, from 200 KHz to 1 MHz, which allows the user to optimize for efficiency and ripple. The VI-JN3-IX-S is also protected from over-voltage, under-voltage, over-current, and over-temperature conditions.
The VI-JN3-IX-S can be used in a variety of applications. It is suitable for use in telecom base stations, industrial control systems, PLC systems, industrial automation systems, and other 24V/36V/48V system applications. It is also suitable for use in automotive and lighting applications. Due to its wide input voltage range, it can be used with lead-acid batteries, Li-ion batteries, and regulated DC power sources.
In conclusion, the VI-JN3-IX-S DC-DC converter is a reliable and efficient solution for a variety of power supply applications. It can provide a wide input voltage range, high efficiency, and low output ripple noise. It is suitable for use in industrial automation, automotive, and lighting applications, as well as many other applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...