Allicdata Part #: | VI-JN4-CW-F1-ND |
Manufacturer Part#: |
VI-JN4-CW-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 48V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 48V 2.... |
DataSheet: | VI-JN4-CW-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.08A |
Base Part Number: | VI-JN4 |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 48V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electrical components that perform the function of converting a DC power source from one voltage level to another. One of the most common DC-DC converters used in today\'s applications is the VI-JN4-CW-F1. The VI-JN4-CW-F1 is a power conversion device that has been specifically designed for a variety of applications and can provide a perfect solution for a wide range of power conversion problems.
The applications of the VI-JN4-CW-F1 are wide-ranging and depend on the specific requirements of the power conversion task. It can be used in the automotive industry for vehicle charging solutions, in consumer electronics for the conversion of a single power supply to various output voltages, and in industrial settings for various control system requirements. In addition, this DC-DC converter can also be used for battery charging systems, solar panel systems, and uninterruptible power supplies (UPS).
The working principle of the VI-JN4-CW-F1 is based on the concept of Input Current-Source Conversion (ICSC). The DC-DC converter uses a pair of switching MOSFETs to draw power from the input source and convert it to the desired voltage output. The input voltage is then fed into the ICSC converter, which is a two-stage power conversion system comprising of an input stage and an output stage. The input stage amplifies the input voltage to a higher level, while the output stage takes this amplified voltage and converts it to the desired low voltage output.
The VI-JN4-CW-F1 also has a built-in safeguard that ensures the converter will not be damaged due to over or under-voltage conditions. This safeguard is integrated with the ICSC circuit and will automatically turn off the converter if the input voltage is outside of the specified range. This ensures that the converter is protected from unexpected and extreme power fluctuations.
The VI-JN4-CW-F1 is an efficient, reliable, and versatile DC-DC converter that provides a perfect solution for a wide range of power conversion problems. With its wide range of applications and its safe and reliable operation, the VI-JN4-CW-F1 is an ideal choice for all of your power conversion needs.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...