Allicdata Part #: | VI-JN4-EW-F4-ND |
Manufacturer Part#: |
VI-JN4-EW-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 48V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 48V 2.... |
DataSheet: | VI-JN4-EW-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.08A |
Base Part Number: | VI-JN4 |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 48V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are a type of power converter that converts direct current (DC) from one voltage to another. This type of converter is commonly used in various industry applications such as telecommunications, automotive, aeronautics, and medical equipment. One such type of converter is the VI-JN4-EW-F4 DC-DC Converter.
The VI-JN4-EW-F4 is a non-isolated buck converter. It is specifically designed for use as a point-of-load (POL) converter, providing conversion from a wide range of input voltages to a fixed regulated output voltage. It is a highly efficient and cost-effective solution for many low power applications.
The key features of this type of DC-DC converter include its wide range voltage of input with an adjustable output voltage from 0.8V to 5.0V. Maximum output current is 3A. The high efficiency is realized from its 500 kHz switching frequency that allows for a very small solution size and high output power densit. The VI-JN4-EW-F4 also features over current protection, over temperature protection and short circuit protection which ensure a reliable, protected and safe operation. It is also RoHS compliant and PCB mountable.
The VI-JN4-EW-F4 DC-DC converter works by taking an input voltage in the range of 3V to 25V and converting it to a regulated output voltage. The conversion process takes place inside the DC-DC converter module which consists of an inductor, capacitors, a diode and a switch. The input power is switched low and high by the controller at a high switching frequency and used to generate a pulsed voltage which is then sent to the output filter stages and rectified in the output diode before it reaches the output capacitor. The output voltage is then regulated by the feedback loop.
The VI-JN4-EW-F4 is a great choice for a wide range of low voltage applications, providing high efficiency conversion from a wide range of input voltages to a fixed output voltage. Its features make it an ideal solution for a variety of industries such as telecommunications, automotive, aeronautic and medical equipment.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...