VI-JN4-IY-F3

Current - Output (Max):	1.04A
Base Part Number:	VI-JN4
Size / Dimension:	2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input (Max):	76V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VI-JN4-IY-F3 DC DC Converters apply using a voltage conversion system and works as converter devices that take an input voltage and generates a regulated output voltage. This is an effort to convert a source voltage applied across two wires into another voltage on another two wires.The technology behind these converters offers very stable and reliable performance. It also makes them capable of handling high voltages and currents with fluctuating supply voltages and very low noise generation. The VI-JN4-IY-F3 DC DC Converters also have a very high efficiency rating due to the high quality components that make up the system.The first step for using a DC DC converter is to prepare the source voltage and a load for the system. The source voltage should be the same as the load, or a slightly higher voltage if the converter is used to reduce the voltage for the load, such as when a 24V DC power source is used to feed a 12V DC load. Once the source and load have been selected, they need to be connected to the DC DC converter.Next is to select the appropriate output voltage of the converter. The output voltage of the converter is usually higher than the source voltage and is determined by the number of turns ratio of the coil and the current draw of the load. Once the output voltage is determined, a voltage regulator may be necessary to maintain a steady output voltage. This is typically done with Zener diodes.The operation of a DC DC converter is quite simple. The DC circuit is composed of a transformer and an intermediary rectifier, in essence it is an AC to DC bridge circuit. The transformer is connected in a series and the rectifier performs current rectification. The two sides of the transformer are connected to a DC source and the output is connected directly to the load. When the voltage on the source is higher than the set level for the output, the rectifier connects the two sides of the output and the load starts to draw energy from the source. This process continues until the current in the load stops increasing or the output voltage reaches the desired level.DC DC converters are often used in a variety of applications due to their high efficiency and small size. They are used as power supplies for electronic equipment, such as printers, computers, and medical equipment. DC DC converters can also be used to charge batteries, or to convert household AC voltage into other DCV levels.In summary, the VI-JN4-IY-F3 DC DC Converters offer numerous advantages over other types of converters, such as their small size, high efficiency, wide input voltage range, and high-performing components. They offer a reliable and efficient conversion of DC voltages in a variety of applications such as powering electronic equipment, charging batteries, and regulating household AC voltage.

The specific data is subject to PDF, and the above content is for reference