Allicdata Part #: | VI-JNB-IX-S-ND |
Manufacturer Part#: |
VI-JNB-IX-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 95V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 95V 79... |
DataSheet: | VI-JNB-IX-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 790mA |
Base Part Number: | VI-JNB |
Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 95V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used in a wide range of applications such as telecommunications, automotive, computing, renewable energy and consumer electronics, as the most basic form of power conversion. DC-DC converters are employed in different varieties of circuits to generate power out of a given DC voltage level, or reduce the DC voltage from a given high level to a lower level.
VI-JNB-IX-S is one of the most popular DC-DC converter models, and can be used to both convert a low DC voltage to a high DC voltage, and also to reduce a high DC voltage to a lower level. The VI-JNB-IX-S is a voltage-mode buck-boost type DC-DC converter.
The VI-JNB-IX-S provides a regulated output by regulating the average current sent to the output. The active switch operates over a wide range of frequencies and is typically implemented in either synchronous or non-synchronous buck-boost converter mode. The converter supports continuous conduction mode (CCM) operation. This means that the current in the switches, and the current in the output filter inductor, never reach zero.
The working principle of the VI-JNB-IX-S converter is based on a voltage-mode control scheme. When the voltage across the inductor reaches a certain voltage threshold, the converter turns off the switch and the inductor current flows and charges the output filter capacitor. The output voltage can be adjusted by changing the duty cycle of the switch. This technique is known as Pulse Width Modulation (PWM). The output voltage can be regulated by varying the voltage referenced by the regulator.
The VI-JNB-IX-S converter is used in applications where a high output voltage is needed, or a high input voltage needs to be reduced. Typical applications include automotive fuel injectors, telecommunications, solar and wind power generation, and consumer electronics. The converter also supports peak current mode control, which is ideally suited for applications with high output power demands.
The VI-JNB-IX-S DC-DC converter is an indispensable part of many systems where power conversion is required. With its wide range of applications and versatile architecture, the VI-JNB-IX-S makes power conversion a reliable and cost-effective process.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...