VI-JND-MZ-F3

Current - Output (Max):	294mA
Base Part Number:	VI-JND
Size / Dimension:	2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	25W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	85V
Voltage - Input (Max):	76V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices that convert direct current (DC) power from one voltage level to another. They are used to convert the voltage of a power source to match the level of a particular device, or to regulate the output voltage level from a power source. They are commonly used in applications such as power supplies, voltage regulators, motors and mobile devices. The most common types of DC-DC converter are the VI-JND-MZ-F3 converter, which are used in a variety of applications.The VI-JND-MZ-F3 converter is a type of switched-mode converter, meaning that it uses electronic switches to convert a DC input voltage into a DC output voltage, depending on the required voltage level. This type of converter is often referred to as a “two-quadrant” converter, as it can operate in either buck or boost mode, depending on the voltage requirements.In buck mode, the VI-JND-MZ-F3 converter operates by taking a higher voltage and reducing it to a lower voltage. The converter uses two voltage sources, the input voltage and the output voltage. The input voltage is connected to the converter, which is then connected to the output voltage. The converter then switches between these two sources at regular intervals, reducing the input voltage to the output voltage.In boost mode, the VI-JND-MZ-F3 converter serves to increase the voltage from a lower input voltage to a higher output voltage. As with buck mode, the converter is connected to both the input and output voltage sources. It switches between them at regular intervals, increasing the input voltage into the output voltage.The VI-JND-MZ-F3 converter is a very efficient type of DC-DC converter. It converts a DC input voltage into DC output voltage with a minimum of heat dissipation, making it an ideal choice for many applications. Its high efficiency, coupled with its small size and low cost, make it a popular choice for applications such as notebook computers, cell phones, and other portable electronics.The VI-JND-MZ-F3 converter can also be used as a voltage regulator, in which it senses a varying input voltage and outputs a steady voltage. This is done by using the converter in a “closed-loop” configuration, in which it senses the input voltage and adjusts the output accordingly to maintain a steady voltage.The VI-JND-MZ-F3 converter is used in a variety of applications, ranging from automotive electronics to communications equipment. Its high efficiency, coupled with its small size and low cost make it an ideal choice for a number of applications. Its wide range of applications, from low to high voltages, make it a versatile choice for many different applications.

The specific data is subject to PDF, and the above content is for reference