Allicdata Part #: | VI-JNH-EW-F4-ND |
Manufacturer Part#: |
VI-JNH-EW-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 52V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 52V 1.... |
DataSheet: | VI-JNH-EW-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.92A |
Base Part Number: | VI-JNH |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 52V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are a special type of converter device which converts the input direct current (DC) from one voltage level to another. The most common type of DC-DC converter is the VI-JNH-EW-F4 (also known as the “buck” converter, due to the shape of its waveform). A VI-JNH-EW-F4 converter is capable of outputting a higher, regulated voltage from a lower input voltage. This makes it ideal for applications such as powering a load from a battery.
At a basic level, the VI-JNH-EW-F4 converter consists of three main components: an input capacitor, an inductor, and an output capacitor. The input voltage is applied across the input capacitor, which charges the capacitor. This charged capacitor is then connected to the inductor, which stores the energy. The inductor then releases the energy into the output capacitor, which is connected to the output voltage. This output capacitor then supplies the output voltage to the load.
By varying the duty cycle of theVI-JNH-EW-F4 converter, the output voltage can be controlled. In this type of circuit, the duty cycle is defined as the percentage of time that the switch is in the on-state compared to the total time. By increasing the duty cycle, the output voltage is increased. Conversely, decreasing the duty cycle results in a decrease in the output voltage.
In addition to controlling the output voltage, the VI-JNH-EW-F4 converter can also be used to control the current output. This is achieved by modifying the on-time and off-time of the switch to either increase or decrease the current output. By doing this, the output current can be regulated and stabilized.
VI-JNH-EW-F4 converters are widely used in a variety of applications, such as in telecommunications, automotive electronics, consumer electronics, and consumer power electronics. They make it possible to power devices from a variety of voltage sources, such as a 12V lead-acid battery, or from the mains power grid. They are also used to interconnect different types of devices, such as a laptop and a USB device.
In conclusion, theVI-JNH-EW-F4 converter is an ideal solution for a variety of applications, as it can be used to control and regulate both the output voltage and current. By varying the duty cycle and parameters of the circuit, output voltage and current can be optimally adjusted to suit specific needs. As such, this type of converter is a versatile and useful tool for many different applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...