Allicdata Part #: | VI-JNH-EX-F3-ND |
Manufacturer Part#: |
VI-JNH-EX-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 52V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 52V 1.... |
DataSheet: | VI-JNH-EX-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.44A |
Base Part Number: | VI-JNH |
Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 52V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are becoming increasingly popular in a wide variety of applications, including electric cars, solar energy systems, consumer electronics, and more. The VI-JNH-EX-F3 is an example of this type of technology. It essentially allows for the efficient conversion of direct current into alternating current. In this article, we’ll take a closer look at the application field and working principle of the VI-JNH-EX-F3.
The VI-JNH-EX-F3 is an isolated flyback converter, commonly used for low power applications. It features a high-power factor and low-noise operation, making it suitable for a wide variety of applications. This includes applications where the power output needs to remain clean and isolated, such as audio amplifiers. Additionally, it has a range of protections that safeguard against overload and short circuit, making it suitable for a wide range of industrial and consumer applications.
The VI-JNH-EX-F3 operates as a switch mode power supply, meaning it acts as a switch that cycles on and off at a high frequency. When in the “off” state, the coil inductance stores energy and when the switch is turned “on”, the energy is released and sent to the load. The frequency of the on/off switching is determined by the input voltage, with higher voltage requiring higher frequencies.
Besides its main application in low power applications, the VI-JNH-EX-F3 can also be used to provide galvanic isolation between a power source and a load. This helps to reduce potential ground loops and electronic noise, providing a cleaner power signal. The VI-JNH-EX-F3 achieves this through a magnetic gap between the primary and secondary coils, which helps prevent electrical contact without compromising performance.
The VI-JNH-EX-F3 benefits from a number of features, such as a wide input voltage range, wide operating temperature range, low stand-by power consumption, and overvoltage and over current protection. Additionally, it comes with a low cost, integrated heat sink, which helps to keep the voltage regulator from getting too hot during extended use.
In terms of applications, the VI-JNH-EX-F3 is most commonly used in consumer electronics, such as mobile phones, computers, tablets, and audio/video equipment. It can also be used in industrial systems, renewable energy applications, and battery charging systems. The wide input voltage range, low stand-by power consumption, and comprehensive protection features make it an ideal choice for these applications.
Overall, the VI-JNH-EX-F3 is a reliable and efficient DC-DC converter that is suitable for a variety of applications. It can provide clean power conversion, galvanic isolation, and comprehensive protection. With its high-power factor, low-noise operation, and low cost, the VI-JNH-EX-F3 is an excellent choice for low power applications in a wide variety of fields.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...