Allicdata Part #: | VI-JNJ-CW-F1-ND |
Manufacturer Part#: |
VI-JNJ-CW-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 36V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 36V 2.... |
DataSheet: | VI-JNJ-CW-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.78A |
Base Part Number: | VI-JNJ |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 36V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters have become an integral part of the electronics industry. They have been around for many years and are used to power a variety of devices. A typical DC-DC converter Converts a direct current (DC) source to either another DC source, or an alternating current (AC) source. Many commonly used DC-DC converters are inductive step-down, pulse-width-modulated (PWM), and switching buck/boost converters.
The VI-JNJ-CW-F1 is an example of a switching Buck/Boost DC DC converter. It consists of two basic components; an integrated circuit (IC) and a power switch. The integrated circuit is responsible for power conversion and has built-in protection features. The power switch provides the necessary current to support the load current. In addition, the power switch can also increase or decrease the voltage as needed.
The VI-JNJ-CW-F1 has a wide range of applications and can be used in a variety of situations. It can be used to convert a DC source into an AC source, or to step up or step down an existing DC voltage. It can also be used in a power supply to regulate both current and voltage. By adjusting the duty cycle of the Fastest switch, either positive or negative voltage can be generated.
The working principle behind the VI-JNJ-CW-F1 is switching operation. The IC continuously switches the power switch on and off in order to regulate the input voltage and output voltage. The output voltage can be adjusted by altering the duty cycle of the power switch in order to vary the proportion of “on” time and “off” time. This is done by measuring the input voltage with a zero-cross-point detector and then altering the duty cycle accordingly.
The VI-JNJ-CW-F1 is a reliable and efficient DC-DC converter that has a wide range of applications. Its switching operation enables it to provide high voltage and current conversion, while its built-in protection features ensure safe operation. As a result, the VI-JNJ-CW-F1 can be used in a variety of applications, ranging from power supplies to industrial equipment.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...