Allicdata Part #: | VI-JNK-MX-F2-ND |
Manufacturer Part#: |
VI-JNK-MX-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 40V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 40V 1.... |
DataSheet: | VI-JNK-MX-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.88A |
Base Part Number: | VI-JNK |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 40V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters refer to devices that convert energy from direct current (DC) form into direct current or alternating current (AC) form. This type of conversion usually takes place in both directions, often referred to as ‘bidirectional.’ DC DC Converters come in many forms. These include inverters, voltage converters, battery chargers, and AC adapters. Each type of converter has its own distinct characteristics and features.
VI-JNK-MX-F2 Application Field and Working Principle
VI-JNK-MX-F2 is a type of DC DC converter primarily designed for high-power applications in industrial, communication, and power electronics systems. It is mostly used for applications that require at least 12V output voltage. The range of input voltage varies from 10.8V to 15V. The output voltage of VI-JNK-MX-F2 may be adjusted in the range from 2-20V at a maximum output current of 16A. This device also uses the low-noise electric fencing control and the synchronous rectified current technology.
The VI-JNK-MX-F2 DC DC converter consists of a number of components, including input capacitors, inductors, output rectifier diodes, switching transistors, and control logic. The input capacitors store charge to supply the input current, while the inductors reduce the voltage ripple and increase the power efficiency. The output rectifier diodes allow current to flow in one direction only, while the switching transistors vary the resistance and control the output voltage. The control logic continuously monitors the input and output voltage to ensure the desired output voltage is maintained.
The VI-JNK-MX-F2\'s high efficiency and low ripple make it suitable for applications such as telecommunications, electronic systems, and power hosting systems. It can also be designed to operate with flexible input voltage range and regulated output voltage. The device has a maximum efficiency of 95%.
The specific data is subject to PDF, and the above content is for referenceDC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...