Allicdata Part #: | VI-JNL-IW-F3-ND |
Manufacturer Part#: |
VI-JNL-IW-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 28V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 28V 3.... |
DataSheet: | VI-JNL-IW-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 3.57A |
Base Part Number: | VI-JNL |
Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 28V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
A DC-DC converter is an electrical device that converts one DC voltage level to another. It is also known as a "regulator". It can take a low voltage from a battery and convert it to a high voltage that can be used in electronic circuits. The most common types of DC-DC converters are boost, buck, flyback, and forward converters.
VI-JNL-IW-F3 Application Field and Working Principle
The VI-JNL-IW-F3 is a DC-DC converter that is designed to convert an input voltage range of 3.3V-12V to an output voltage range of 0.8V-4.2V. This DC-DC converter is mainly used in portable or low-power applications, such as cell phones, tablets, and other hand-held devices. The device is also suitable for automotive applications that require an appropriately-regulated voltage.
The VI-JNL-IW-F3 uses buck-converter topology, and is capable of delivering 0.75A of output current. It also features up to 93% of peak efficiency and extremely low stand-by power consumption.
The device contains an internal over-voltage protection circuit that protects it from supply transients and over-voltages. It also has an under-voltage protection circuit to prevent the output voltage from dropping below the preset lower limit. This feature prevents short-circuiting of the output and helps ensure safe operation.
The converter also features a soft-start function that minimizes the in-rush current on start-up. This helps to extend the life of the converter as well as the power supply.
The VI-JNL-IW-F3 has an ultra-wide input voltage range that makes it suitable for applications with varying input voltages. It also has comprehensive protection functions that help ensure reliable operation despite strong power fluctuations.
In order to ensure proper operation, the converter must have a minimum load at its output. A minimum load of 15mA is recommended, and if the load falls below this value, a proper inductor is required for stable operation.
Conclusion
The VI-JNL-IW-F3 is a DC-DC converter designed to convert a wide range of input voltages into a regulated output voltage. It has an efficient buck-converter topology and features comprehensive protection functions to help ensure reliable operation. The device also minimizes the in-rush current on start-up, and requires a minimum load of 15mA for stable operation.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...