Allicdata Part #: | VI-JNM-MX-F3-ND |
Manufacturer Part#: |
VI-JNM-MX-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 7.... |
DataSheet: | VI-JNM-MX-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 7.5A |
Base Part Number: | VI-JNM |
Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices that convert direct current from one voltage level to another. They are among the most widely used devices in the electrical industry, and are typically used to convert power for industrial, automotive, and consumer applications. The VI-JNM-MX-F3 is an advanced DC-DC converter used for these applications. This article will discuss the applications field and working principle of the VI-JNM-MX-F3.
The VI-JNM-MX-F3 DC-DC converter is designed for a range of applications, from 5 to 600 Watts. It is used in a variety of applications, including portable electronics, industrial control systems, automotive, and consumer electronics. In addition, it can be used in renewable energy systems, such as solar, wind, and fuel cell applications. The device is also well suited for I/O modules, such as CAN bus and CANbus/Ethernet converters, and various Ethernet interface converters.
The VI-JNM-MX-F3 is a DC-DC converter that operates on either a buck or boost topology. It features an internal power stage that provides high efficiency and high power density. The device is also equipped with a variety of protections, such as overvoltage, overtemperature, and short-circuit protection. Additionally, the device features an active current limit circuit that helps ensure safe operation and reduces power loss.
The VI-JNM-MX-F3 DC-DC converter works on the principle of power conversion. The input voltage is converted to a higher or lower voltage depending on the type of converter chosen. For a buck converter, an input voltage is converted to a lower output voltage. For a boost converter, the input voltage is converted to a higher output voltage. The device utilizes switchmode technology that enables it to maintain high efficiency throughout the conversion process.
The VI-JNM-MX-F3 is designed to operate over a wide input voltage range, and is capable of providing up to six different output voltages. The device features a wide variety of features, including Intelligent Power Control (IPC), Ultra-Efficient Active Current Limit (ECLIM), and adjustable frequencies up to 2.2MHz. These features enable the device to operate with the highest efficiency, and also ensure it is able to remain stable even when the system load is changing. Additionally, the device features a wide range of protections, including overvoltage, overtemperature, and short-circuit protection.
Conclusion
The VI-JNM-MX-F3 is a versatile DC-DC converter that is well-suited for a variety of applications. The device is designed to operate on either a buck or boost topology, and utilizes switchmode technology to maintain high efficiency. The device is also designed to provide up to six different output voltages, and is equipped with a wide variety of features, such as Intelligent Power Control (IPC), Ultra-Efficient Active Current Limit (ECLIM), and adjustable frequencies up to 2.2MHz. Additionally, the device is protected against overvoltage, overtemperature, and short-circuit conditions. The VI-JNM-MX-F3 is an ideal solution for a variety of DC-DC conversion applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...