Allicdata Part #: | VI-JNN-CZ-ND |
Manufacturer Part#: |
VI-JNN-CZ |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VI-JNN-CZ Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.35A |
Base Part Number: | VI-JNN |
Size / Dimension: | 2.28" L x 2.40" W x 0.50" H (57.9mm x 70.0mm x 12.7mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 18.5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are components that convert a DC voltage from a higher voltage to a lower voltage. These devices are commonly used for power supply applications in which an AC or DC is supplied to a load. VI-JNN-CZ is a type of DC-DC converter used to regulate and control the flow of power to a load. It is capable of providing efficient power conversion from a higher voltage to a lower voltage with minimal changes in output voltage.
The VI-JNN-CZ converter consists of two primary components: a power electronics module and a controller. The power electronics module consists of a power transformer, a diode bridge rectifier and a voltage regulator. The controller is an intelligent control system which has built-in features such as auto-sensing and dynamic voltage regulation. This feature offers control and protection from potential voltage fluctuations.
The VI-JNN-CZ converter is typically used in applications that require a constant voltage output despite varying input voltage conditions. It can also be used in hybrid buses and EVs, where the same level of power is needed in all operating conditions. In addition, this converter can also be used in solar and wind power applications to maintain a constant power output for the system.
The working principle of the VI-JNN-CZ converter is based on the principle of inductive coupling. This is done by passing a DC voltage through a transformer to create a changing magnetic field, which is then used to induce a voltage in a secondary coil. This induced voltage is then rectified and regulated by the power electronics module so that it can be used to power a load.
The VI-JNN-CZ converter is a high-performance, low-cost solution for applications such as motor control, solar and wind energy, automotive, industrial systems, and aerospace. It is designed to provide high efficiency and reliable operation while maintaining low acoustic noise. The device offers advantages such as high output power, high efficiency, wide operating frequency range, and low electromagnetic interference (EMI). The compact size of the converter also makes it suitable for installation in small spaces.
Overall, the VI-JNN-CZ converter is an ideal solution for applications that require efficient power conversion from a higher voltage to a lower voltage. Its high efficiency, low noise, and low cost make it a popular choice in power supply applications. The device also offers other benefits such as wide operating frequency range, minimal changes in output voltage, and low EMI.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...