VI-JNN-EW-B1 Allicdata Electronics
Allicdata Part #:

VI-JNN-EW-B1-ND

Manufacturer Part#:

VI-JNN-EW-B1

Price: $ 0.00
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 18.5V 100W
More Detail: Isolated Module DC DC Converter 1 Output 18.5V ...
DataSheet: VI-JNN-EW-B1 datasheetVI-JNN-EW-B1 Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Current - Output (Max): 5.41A
Base Part Number: VI-JNN
Size / Dimension: 2.36" L x 2.28" W x 1.08" H (59.9mm x 57.9mm x 27.4mm)
Package / Case: Half Brick
Mounting Type: Through Hole
Efficiency: 88%
Operating Temperature: -10°C ~ 100°C
Features: OCP, SCP
Applications: ITE (Commercial)
Voltage - Isolation: 3kV
Power (Watts): 100W
Series: VI-J00™
Voltage - Output 3: --
Voltage - Output 2: --
Voltage - Output 1: 18.5V
Voltage - Input (Max): 76V
Voltage - Input (Min): 36V
Number of Outputs: 1
Type: Isolated Module
Part Status: Active
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC–DC converters are electronic power supplies used to efficiently convert direct current (DC) energy from one voltage level to another. They are commonly used to provide a regulated output voltage or current from a limited source such as a battery pack. The most common types of DC–DC converters are the isolated type, which provide electrical isolation between the input and output, and the non-isolated type, which do not.

The VI-JNN-EW-B1 DC–DC converter is a type of isolated DC–DC converter that is designed to provide regulated output voltage and current levels from low-voltage DC input sources. It is a full-bridge converter with a single-ended primary-inductor converter (SEPIC) topology. This design provides a wide input and output voltage range and high efficiency operation over a wide range of input voltages. The VI-JNN-EW-B1 DC–DC converter utilizes synchronous rectification technology to further reduce the output voltage ripple and improve the overall efficiency.

The VI-JNN-EW-B1 DC–DC converter has an input voltage range of 4–32 V DC and is designed to deliver up to 700 mA of output current. It is capable of supplying output voltages of 1.2 to 5.5 V DC and offers regulated output voltage and current across the entire temperature range. Additionally, the converter provides excellent line and load regulation, making it suitable for a variety of applications.

In terms of application fields, the VI-JNN-EW-B1 DC–DC converter is commonly used in automotive, industrial, telecom, and medical electronic applications. Its wide input voltage range and high power output enable it to be used in a variety of applications, such as powering LEDs and microcontrollers, and powering video surveillance and robotics.

The working principle of the VI-JNN-EW-B1 DC–DC converter is based on the SEPIC topology. In this topology, the input voltage is applied to a full-bridge rectifier, which is essentially a bridge of four diodes. This rectified voltage is then passed through a primary inductor and filtered to produce the filtered DC input voltage. This rectified voltage is then applied to an H-bridge switch, which is composed of four MOSFETs, to produce switched signals for the output Voltage.

The H-bridge is controlled by a controller that generates pulse width modulation (PWM) signals for the gates of the MOSFETs. The generated PWM signals are used to control the switching frequency of the MOSFETs, which in turn controls the average output voltage. The output voltage can be adjusted by varying the duty cycle of the PWM signals, which is regulated by an error amplifier.

The power flow through the VI-JNN-EW-B1 DC–DC converter is then regulated by the synchronous rectifier, which is composed of low-on resistance MOSFETs with zero reverse-recovery. The synchronous rectifier provides controlled rectification to further reduce the output voltage ripple and improve the efficiency of the converter.

The VI-JNN-EW-B1 DC–DC converter is a flexible and efficient power supply solution with a wide input voltage range and high power output capability. It is ideal for automotive, industrial, telecom, and medical electronic applications, as well as other applications that require a regulated output voltage and current across a wide temperature range. Its efficient SEPIC topology and synchronous rectifier design make it a reliable and cost effective solution for various applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics