Allicdata Part #: | VI-JNN-IX-B1-ND |
Manufacturer Part#: |
VI-JNN-IX-B1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VI-JNN-IX-B1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 4.05A |
Base Part Number: | VI-JNN |
Size / Dimension: | 2.36" L x 2.28" W x 1.08" H (59.9mm x 57.9mm x 27.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 18.5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC/DC converters such as VI-JNN-IX-B1 have many applications and playing an important role in the power conversion industry. These converters convert DC voltages from one level to another through power supplies that work with various input voltage ranges. They are used in many industries, including military, aerospace, motor control, automotive, telecommunications, and medical.
The VI-JNN-IX-B1 DC/DC converter offers cost-effective solutions for applications requiring DC-to-DC voltage conversion from a higher to a lower voltage. It has the ability to transition from a higher input voltage to a lower voltage level with an adjustable current limit setting designed for a wide range of applications. The VI-JNN-IX-B1 is designed with an external case and this allows the user to easily install or mount the device on any surface.
The VI-JNN-IX-B1 is designed to accept up to 50 VDC as the input voltage and reach a maximum output power of 600W. The device’s switching frequency is adjustable up to 200kHz and the output voltage range is adjustable from 0−50V. The device also has a short circuit and over temperature protection built in. Furthermore, the VI-JNN-IX-B1 comes equipped with a linear current limiting circuit that prevents excessive current when the output current exceeds the limit.
The operating principle of the VI-JNN-IX-B1 is simple. At the input, a bridge rectifier will convert the AC input voltage to a DC voltage. Then an input filter will remove ripple components from the input power. This is important so that the input ripple does not affect the stability of the output voltage. After that, a pulse width modulation (PWM) controller is used to control the conduction time of the device’s switches, and a control feedback circuit is used to maintain the output voltage level. Finally, an output filter is used to smooth out the pulses to provide good output voltage regulation.
The VI-JNN-IX-B1 is an ideal device for powering low-noise, high-performance applications. It offers an efficient and cost-effective solution for power conversion from a higher integration level to a lower level. The device provides superior thermal performance as well as short circuit and over temperature protection. In addition, the device’s small size and simple installation make it an ideal choice for many applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...