Allicdata Part #: | VI-JNN-MW-F4-ND |
Manufacturer Part#: |
VI-JNN-MW-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VI-JNN-MW-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 5.41A |
Base Part Number: | VI-JNN |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 18.5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used to convert direct current from one voltage level to another voltage level. These converters are very useful as they can be used to supply power to electronic systems from sources that are not reliable. The VI-JNN-MW-F4 converter is a small, efficient and cost-effective unit that is designed for a wide range of applications and can be used in medical, telecom, automotive and other applications.
The VI-JNN-MW-F4 converter operates using a robust, multi-mode dc-dc topology, which is used to track the input voltage and adjust the output voltage accordingly. It utilises two input channels, two output stages and an embedded MOSFET, which is designed to minimise power loss. The converter also features a high efficiency of up to 97%, offering up to 90% power conversion efficiency for 12V-48V input range.
The VI-JNN-MW-F4 converter is available in a variety of configurations including 3-phase, 4-phase, single-phase and multiple-phase configurations. These different configurations allow the converter to handle varying input voltages, input currents, output voltages and output currents, based on the application requirements. All of these different combinations are supported by the unit, allowing for high flexibility in system design.
The VI-JNN-MW-F4 converter is designed to operate at a very low standby power, so that the power consumption is very low, thereby providing a more efficient use of energy. It also features a wide input range, a wide output range, a high operating frequency and a low total harmonic distortion. The unit is built with an advanced current-mode control scheme, which allows for improved system protection and load behavior.
The VI-JNN-MW-F4 converter can be used in a wide range of applications such as medical, telecom, industrial, automobile, home appliances, LED lighting and more. It is capable of handling a wide variety of input and output voltages and currents, enabling the converter to be used in multiple applications. The unit is also designed for high temperature and high humidity conditions, making it suitable for use in harsh environments.
Finally, the VI-JNN-MW-F4 converter is also designed to provide protection against short-circuiting and overloads to ensure the safety of the system. It features onboard monitoring circuitry which will detect any overloads or short-circuits and shut down the converter automatically. This allows the unit to remain safe and operational at all times, even in the most unpredictable and challenging environments.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...