| Allicdata Part #: | VI-JNP-CY-F3-ND |
| Manufacturer Part#: |
VI-JNP-CY-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 13.8V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
| DataSheet: |  VI-JNP-CY-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.62A |
| Base Part Number: | VI-JNP |
| Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 13.8V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC to DC converters are used to convert DC power in one form to another. They are typically used to either step up or step down the DC voltage from one level to another, depending on the application. TheVI-JNP-CY-F3 converter is a type of DC to DC converter that can be used for various applications depending on the input voltage, current, and output voltage and current.
The VI-JNP-CY-F3 converter is a DC-DC power converter with an input voltage range of 4.5-13.2V and a maximum input current of up to 30A. It is a high efficiency buck-boost converter with an efficiency of up to 96%. It can be used to provide power to an application such as an embedded system or off-board low voltage DC system. The output voltage range of the VI-JNP-CY-F3 is adjustable, from 0.8V to 13.2V.
Working Principle
The VI-JNP-CY-F3 converter is a buck-boost converter, meaning that it can step either up or down the input voltage depending on the application and the voltage adjustments. It has an output voltage range of 0.8V to 13.2V and a maximum input current of up to 30A. The converter works by taking the input voltage and converting it into pulses of voltage to the output circuit through two power transistors (MOSFETs). The frequency of the pulses is determined by the switching frequency of the converter, which can be adjusted depending on the application.
The frequency of the pulses is a key factor in determining the output voltage and current, as the higher the switching frequency, the higher the output voltage and current will be. The VI-JNP-CY-F3 converter has an adjustable switching frequency of up to 20kHz, which allows for a very wide range of output voltage and current.
The VI-JNP-CY-F3 converter is an ideal solution for a wide range of applications, including embedded systems, industrial applications, and off-board vehicle charging systems. The adjustable input and output voltage and current, as well as the high efficiency, make it a great choice for any application that requires a reliable and efficient DC to DC converter.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...