| Allicdata Part #: | VI-JNR-CY-F3-ND |
| Manufacturer Part#: |
VI-JNR-CY-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 7.5V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 7.5V 6... |
| DataSheet: |  VI-JNR-CY-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 6.67A |
| Base Part Number: | VI-JNR |
| Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 7.5V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are used in many applications to convert a constant DC voltage to a different DC voltage. The VI-JNR-CY-F3 is a type of DC to DC converter that is power efficient and has a wide range of input and output voltage capabilities. This converter can be used for a variety of applications, such as powering a digital logic circuit or driving a motor.
The VI-JNR-CY-F3 DC to DC converter has several components that allow it to convert from a high input voltage to a lower output voltage. The main components of the converter are the power transistor, the rectifier, and the filter capacitor. The power transistor acts as a variable resistor and is used to control the amount of current flowing through the circuit. The rectifier is used to rectify the incoming AC power into a DC form, and the filter capacitor is used to smooth out the oscillations and ripple in the AC power.
The working principle of the VI-JNR-CY-F3 DC to DC converter is relatively simple. When an input voltage is applied, the power transistor acts as a variable resistor which in turn controls the amount of current flow in the circuit. As the current flow increases, the output voltage decreases. The filter capacitor then adds additional filtering to the output voltage, which further reduces the oscillations and ripple in the output voltage.
The VI-JNR-CY-F3 DC to DC converter is used in a variety of applications because of its power efficiency and wide input and output voltage ranges. It is used in applications such as digital logic circuits, power supplies, motor drives, audio amplifiers, and other applications that require regulated DC supply. It can also be used to power LED lights and other low voltage DC components.
The VI-JNR-CY-F3 DC to DC converter is an efficient and cost-effective solution for applications that require a regulated DC voltage. Its power efficiency and wide input and output voltage ranges make it suitable for a wide variety of applications. This converter is easy to use and set up, making it a great choice for applications where space is limited.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...