Allicdata Part #: | VI-JNR-MY-S-ND |
Manufacturer Part#: |
VI-JNR-MY-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 7.5V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 7.5V 6... |
DataSheet: | VI-JNR-MY-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Specifications
Current - Output (Max): | 6.67A |
Base Part Number: | VI-JNR |
Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 7.5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VI-JNR-MY-S application field and working principleDC to DC converters are electronic devices used to convert a DC input voltage to a different DC output voltage. The range of input and output voltages is usually wide and the power of the converter is limited to a few hundred watts, but may vary depending on the model. DC to DC converters are used in a number of applications, such as in aviation, automotive, medical, and industrial applications.VI-JNR-MY-S is a type of DC to DC converter, capable of handling 150 volts DC input and 150 volts DC output at frequencies ranging from 0-500 Hz. It can provide a maximum output current of 4.0 amps. The device is designed with advanced technology that provides high-efficiency operation and long lifetime. It features built-in current limiting, thermal shutdown, short-circuit protection, and remote on/off control.The VI-JNR-MY-S DC to DC converter is ideal for use in applications that require isolation between the input and output, such as in automotive systems. It is also suitable for use in telecommunications, HVAC, consumer electronics, and medical equipment. The device is capable of handling high wattage and can be used in a variety of voltage and current combinations.To operate the VI-JNR-MY-S DC to DC converter, a power source must be connected to the input terminals. The input voltage and frequency must be adjusted to the desired settings. Once the power is applied, the device will begin to convert the input voltage to the desired output voltage. The current limit and thermal shutdown features of the device protect the converter from damage and ensure safe operation of the system.The VI-JNR-MY-S DC to DC converter is a highly efficient device that has a wide range of applications. It is designed with advanced features to ensure maximum safety and reliability. This device is suitable for use in numerous electrical systems and provides a simple and cost-effective solution for power conversion.The specific data is subject to PDF, and the above content is for reference
Latest Products
AEQ20B48N-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEO40Y48N-6L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-6L
DC DC CONVERTER 1.8V 120WIsolated Module...