Allicdata Part #: | VI-JNT-CY-S-ND |
Manufacturer Part#: |
VI-JNT-CY-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 6.5V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 7... |
DataSheet: | VI-JNT-CY-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 7.69A |
Base Part Number: | VI-JNT |
Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 6.5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are a class of electrical equipment used for supplying electrical power to a load device. These devices can be used to convert DC voltage from one level to another, either stepping up or down, while also providing the power needed to drive loads. One of the most common applications of DC DC converters is to provide AC mains to a battery charger, allowing the charger to run on DC power instead of AC mains. Other applications can include providing a low voltage output for electronics, powering a variety of electronics in a low voltage environment, or even providing power for low power motors.
VI-JNT-CY-S Application Field and Working Principle
VI-JNT-CY-S is a DC to DC converter used in a variety of applications. It has the ability to step up or step down the voltage of a given circuit while providing uninterruptible power. This is achieved by using a step up or step down transformer which works by dynamically altering the voltage in a given circuit. It uses a technique called “transformer tapping” which allows it to vary the voltage of a circuit on the fly.
The VI-JNT-CY-S can also provide power to a load device with low currents. This is done by controlling the output voltage and current. Efficiency is maximized by using a closed-loop feedback system which monitors the output current and voltage level and adjusts the frequency and amplitude to maintain the desired levels. As long as the load requirements remain within the range of the converter’s capabilities, the efficiency will remain high.
The VI-JNT-CY-S is a very versatile DC to DC converter and can be used for a variety of applications, from powering a battery charger to providing low voltage power for electronics. The main advantage of this type of converter is its efficiency, which is made possible by the high quality of its components, which can provide consistent performance in a wide range of operating conditions. Additionally, its closed-loop feedback system ensures that the output voltage and current remain within the desired range. The VI-JNT-CY-S is an ideal choice for a variety of applications and is an excellent choice for those looking for a reliable and efficient DC to DC converter.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...