Allicdata Part #: | VI-JNT-CZ-F1-ND |
Manufacturer Part#: |
VI-JNT-CZ-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 6.5V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 3... |
DataSheet: | VI-JNT-CZ-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 3.85A |
Base Part Number: | VI-JNT |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 6.5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC-DC Converters are a type of energy conversion device that transfers energy between two direct current (DC) circuits of different levels. These converters are also known as Step Up or Step Down or Buck-Boost converters. The most common application of DC-DC converters is in computer or laptop power supplies, where an AC/DC rectifier converts alternating current (AC) input voltage to a regulated DC voltage.
VI-JNT-CZ-F1 is a type of DC-DC converter designed for low power applications and comes in two versions, with different output voltages. The first version is a 12-volt version with a 2A output cut-off, while the second version is a 24-volt version with a 4A cutoff. The device is generally used to step up or step down the input voltage with a wide input voltage range from 8V to 550V. The output can be adjusted with a voltage range from 12V to 24V. The device is highly efficient and has a low EMI profile.
The working principle of the VI-JNT-CZ-F1 is quite simple. It takes a DC voltage source as an input and converts it to a higher or lower DC voltage which can then be used for various applications. The VI-JNT-CZ-F1 takes advantage of a switching Buck-Boost converter which synchronously controls the voltage transition from a higher to a lower voltage and vice versa. It utilizes two switched inductors that exchange energy between input and output. In addition, it uses two complementary switches and one diode to complete the current path. The device also has an internal current-limit circuit which helps protect the device against faulty current condition.
The VI-JNT-CZ-F1 is ideal for applications such as solar panels, battery packs, LCD displays, DC motors, small power electronic systems, and more. It is also suitable for automotive applications, such as charging systems, auxiliary power supplies, start-stop systems, and others. The device operates in a wide range of temperatures from -40°C to +125°C. Furthermore, it can be programmed via I2C or SPI interface.
In conclusion, the VI-JNT-CZ-F1 is a low-profile, high-efficiency DC-DC converter designed for low power applications. It uses a synchronous switching Buck-Boost converter to dynamically control the input voltage from a higher to a lower or vice versa with very low distortion and high efficiency. It is suitable for a wide variety of applications and can be programmed with I2C or SPI interface. The device is efficient, reliable, and highly tolerant to temperature, perfect for a variety of environments.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...