Allicdata Part #: | VI-JNT-MZ-F2-ND |
Manufacturer Part#: |
VI-JNT-MZ-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 6.5V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 3... |
DataSheet: | VI-JNT-MZ-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 3.85A |
Base Part Number: | VI-JNT |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 6.5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC Converters are used to convert direct current (DC) from one form to another, such as a mobile phone charging a laptop. The VI-JNT-MZ-F2 is a DC-DC converter with a specific application field and its own set of working principles.
Applications
The VI-JNT-MZ-F2 is typically used in communication systems, particularly for military communications. It is typically used in a high noise immunity application where EMC (electromagnetic compatibility) protection is required. It is able to take on both voltage input levels above, equal and below input. Furthermore, the VI-JNT-MZ-F2 is able to take on variable voltage output or constant current output, depending on the application requirements.
Working Principle
The VI-JNT-MZ-F2 employs a high frequency switch mode rectifier to draw the DC input current, and then convert it to an adjustable voltage output or constant current output. The VI-JNT-MZ-F2 uses the combination of several components like oscillator, rectifier, voltage regulator, and voltage doubler, etc. to achieve the expected output.
To begin, when the input DC voltage reaches a higher level than the output voltage, the oscillator starts to activate the switching element, which drives the rectifier element. Secondly, the input current is passed through the rectifier to convert the DC current into AC. Then, this AC current is passed through the voltage regulator and the voltage doubler, which does the job of increasing the power of the DC power. Lastly, the AC is then converted into the desired DC output voltage or current.
Conclusion
The VI-JNT-MZ-F2 is a high performance DC-DC converter with a long life and high efficiency, making it a desirable choice for military communication as well as other high noise immunity applications. Its working principles relies on a combination of components to achieve the needed output.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...