Allicdata Part #: | VI-JNV-IX-S-ND |
Manufacturer Part#: |
VI-JNV-IX-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 1... |
DataSheet: | VI-JNV-IX-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 12.93A |
Base Part Number: | VI-JNV |
Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are widely used in the fields of communication, aerospace, automotive, military and industrial control. They are used to convert DC power from one level to another. The most popular type of DC-DC converter is the VI-JNV-IX-S, which uses voltage steps down and current up technology to provide power conversions.
VI-JNV-IX-S Application Field and Working Principle
The VI-JNV-IX-S DC-DC converter is used predominantly in distributed power supplies, as well as RF power amplifiers,communication and radar systems, and is used primarily because of its high efficiency and low operating temperature.
The working principle of the VI-JNV-IX-S is based on the principles of voltage induction, voltage step-down and current step-up technology. The VI-JNV-IX-S is based on a voltage step-down and current step-up converter which works by converting high voltage direct current (DC) electricity to lower voltage direct current (DC). To achieve this, the converter contains two basic components: the transformer and the bridge rectifier network.
The transformer is a key component of the VI-JNV-IX-S and acts as an inductor, converting its input voltage into oscillations. The bridge rectifier network then takes these oscillations and converts them into direct current (DC). This DC voltage is then step-down to the desired voltage level.
The VI-JNV-IX-S also includes a current step-up converter, which takes the step-down voltage and increases the current output to the desired level. This is done via the use of a transformer which operates as an inductor, converting its input current into oscillations. The bridge rectifier network then takes these oscillations and converts them into direct current (DC). This DC voltage is then step-up to the desired voltage level.
The VI-JNV-IX-S is an efficient, low temperature operating, DC-DC converter which is used in distributed power supplies, RF amplifiers and communication, radar, and industrial control circuits. Its low operating temperature and high efficiency make it an ideal choice for applications which require fast response and low operating temperatures. The VI-JNV-IX-S can be used to convert sources of up to 450VDC.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...