VI-JNW-IY-B1

Current - Output (Max):	9.09A
Base Part Number:	VI-JNW
Size / Dimension:	2.36" L x 2.28" W x 1.08" H (59.9mm x 57.9mm x 27.4mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.5V
Voltage - Input (Max):	76V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electrical components used to convert input energy into a different form of output energy. The most common type of DC-DC converter is the VI-JNW-IY-B1 converter, which is used to convert DC input to AC output. The VI-JNW-IY-B1 converter works in two stages. First, a rectifier is used to convert DC input voltage into AC input voltage. Second, an inverter is used to convert the AC input voltage into DC output voltage.The VI-JNW-IY-B1 converter has a wide range of applications, from personal electronics to commercial industrial appliances and even in vehicles. It is often used in applications where high efficiency and minimal power loss are important, such as in solar and wind energy systems. In these systems, the converter helps to maximize the amount of energy produced by the system and minimize system losses.In addition, the VI-JNW-IY-B1 converter is also used in power transmission and distribution systems, where it helps to convert power from one form to another. This type of converter is used in power electronics, such as in power supplies, chargers, and electric motors.The VI-JNW-IY-B1 converter has several key features that make it well-suited for a variety of applications, including a high efficiency rating of up to 95%, a wide input voltage range (from 6V to 800V), and a wide output voltage range (from 12V to 1200V). It also offers high switching frequency and low noise output, and is designed for use in harsh environments such as industrial settings.The working principle of the VI-JNW-IY-B1 converter can be explained by looking at the rectifier and inverter stages. In the rectifier stage, input energy is transferred from DC form to AC form. This is accomplished by using four diodes to form a full-wave bridge rectifier circuit. The AC voltage produced by this circuit is then used to supply the control circuit, which uses the voltage to control the switching of the gate of the MOSFET.In the inverter stage, the AC voltage from the rectifier stage is used to control the switching of the MOSFETs. The switching of the MOSFETs in the phase-controlled inverter causes the output voltage to change from one polarity to the other. This phase-controlled inverter circuit produces a sinusoidal output waveform that has a current amplitude proportional to the input voltage. This sinusoidal waveform is then smoothed to remove any ripples to ensure a clean output signal.The VI-JNW-IY-B1 converter has many advantages over traditional converters, and it is used in a variety of applications due to its high efficiency, wide input and output voltage range, and high switching frequencies. Additionally, its superior noise output and ability to function in harsh environments make it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference