VI-JNW-MY-F3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters like the VI-JNW-MY-F3 are devices that convert direct current (DC) from one voltage level to another voltage level. They are designed to accept an input of 12-48 Volts DC from a DC power system and to output precisely regulated voltages from 0.1 to 12 Volts DC.

The application field for these devices is growing every day. They are widely used in automotive, medical, industrial, and military applications, as well as powering cellular base stations and satellite systems. In automotive applications, they are popular for powering on-board accessories like radios, DVD players, and other portable devices.

The working principle of the VI-JNW-MY-F3 DC to DC converter is fairly straightforward. It uses a pair of transformers and a rectifier and works on the simple principle of electromechanical energy conversion. The converter uses electricity from a DC source to magnetize the core of two transformers, which then produce a voltage difference. The output is then rectified and filtered to produce the desired voltage level.

The primary components of the converter are the transformer primaries and the rectifier. Both elements are wired in series and then connected to the DC source via the input terminals. The transformer primaries are designed to be linear in their voltage output. This means they produce a nearly constant voltage output as the input voltage is varied.

The output of the transformer primary is then applied to the rectifier, which is made up of one or more diodes. The rectifier converts the AC voltage from the transformer to a DC voltage, which is then filtered by a capacitor. The filtered voltage is then fed to the output terminals, where it can be used to power an electronic device.

The transformer windings are designed with the appropriate number of turns to produce the desired voltage output. The rectifier is also carefully chosen to ensure that it can handle the voltage and current levels of the given application. The capacitors used for filtering are also carefully selected to ensure the desired output voltage.

In some cases, an additional voltage regulator may be used to further reduce or increase the output voltage. This is typically done by using a pulse width modulated (PWM) regulator that controls the amount of voltage allowed to flow through the rectifier at any given time.

The VI-JNW-MY-F3 DC to DC converter is a reliable and versatile device that can be used for a variety of applications. Its easy installation and low cost make it a great choice for any application that requires regulated DC power.

The specific data is subject to PDF, and the above content is for reference