Allicdata Part #: | VI-JNZ-CY-F2-ND |
Manufacturer Part#: |
VI-JNZ-CY-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 20W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 10A... |
DataSheet: | VI-JNZ-CY-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 10A |
Base Part Number: | VI-JNZ |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 20W |
Series: | VI-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices used to convert a DC input voltage into an output voltage or current. They are used mainly in consumer electronics, automotive and industrial applications. VI-JNZ-CY-F2 DC-DC converters are used in a wide variety of applications, from power distribution to signal conversion. The VI-JNZ-CY-F2 is a high performance, highly reliable converter tailored specifically for use in automotive and industrial applications.
The VI-JNZ-CY-F2 DC-DC converter combines a high efficiency dual inductor boost topology with a unique ripple cancellation system to provide a power supply with excellent current delivery and low noise. The converter is characterized by a wide operating range, from 4.5V to 12V input and up to 32V output, meaning it is suitable for a variety of applications. The VI-JNZ-CY-F2\'s operating frequency range is also very wide, from 100 kHz to 400 kHz, allowing for excellent dynamic current delivery.
The VI-JNZ-CY-F2 DC-DC converter is designed to operate in a dual inductor boost topology, meaning it is capable of providing high load current and peak power. This topology utilizes two inductors and two capacitors in order to convert a DC input voltage into an output voltage or current. The dual inductor design helps reduce the size and cost of the converter while still providing good output current and power.
The inductors used in the VI-JNZ-CY-F2 converter are synchronous inductors, which provide excellent current delivery and noise immunity. The converter\'s output is then controlled by an internal pulse-width modulation (PWM) controller. The PWM controller drives the converter\'s power switches, allowing for a wide range of output voltages, currents, and power levels.
In addition to the dual inductor topology, the VI-JNZ-CY-F2 DC-DC converter also features a unique ripple cancellation system. This system utilizes an adaptive ripple filter, which dynamically adjusts the converter\'s inductor current, in order to reduce output ripple, while still maximizing efficiency.
The VI-JNZ-CY-F2 DC-DC converter is a high efficiency, high power, and low noise solution for a variety of automotive, industrial, and consumer applications. Its unique features, such as its wide operating range, high load current capability, and ripple cancellation system make it an ideal choice for a variety of applications. In addition, its small size and cost-effective design make it an attractive choice for designers looking for a compact and reliable power supply solution.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...