VI-JT1-MZ-F2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are devices used to convert one form of DC electrical energy to another, usually for purposes like controlling voltage levels or providing power to circuits that require differing source voltages. The VI-JT1-MZ-F2 is a type of DC-DC converter, specifically a high-frequency switching transformer. This converter is highly efficient, with a switching frequency of up to 1 MHz and a conversion efficiency of 95%.

The VI-JT1-MZ-F2 is capable of operating from very low input voltages, often as low as 1.2 volts, and up to a maximum of 28 volts. It has an output voltage range of 0.45 volts to nearly the same input voltage, with a typical peak output current of up to 10 amps. The power output range is up to 120 watts.

This converter is designed with durability in mind, and is able to handle up to 85℃ ambient temperatures. It can also withstand vibrations of up to 5.9G rms. In addition, the device is inherently protected against overloads, short circuits, and open circuits. Protection modes include thermal shutdown, current limiting, short circuit protection, and overvoltage protection.

The VI-JT1-MZ-F2 DC-DC converter is highly versatile and suitable for a variety of applications thanks to its adjustable output voltage and high efficiency. It can be used in communication power supplies, battery-powered devices, solar energy systems, electronics, lighting equipment, and consumer appliances.

The converter works by converting the input DC voltage into an AC voltage through a series of switching operations. The switched voltage is then transformed into a higher or lower voltage with the aid of an isolation transformer. The final DC output is then regulated by an error amplifier and an output voltage feedback loop.

To increase efficiency, a synchronous rectification technique is employed, which replaces the diode for rectifying the output AC voltage with a MOSFET switch. This switch is turned on whenever the transformer’s secondary winding is above the output voltage, and turned off when it is below the output voltage. This reduces the power loss caused by the diode, thus increasing efficiency.

The VI-JT1-MZ-F2 DC-DC converter is an ideal solution for applications that require high efficiency in a compact form factor. It boasts a wide operating voltage range, adjustable output voltage, and a high efficiency rating of up to 95%, making it suitable for a variety of applications. With its built-in protection features and rugged design, it is an excellent choice for reliable power conversion.

The specific data is subject to PDF, and the above content is for reference