| Allicdata Part #: | VI-JTJ-EX-F4-ND |
| Manufacturer Part#: |
VI-JTJ-EX-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 36V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 36V 2.... |
| DataSheet: |  VI-JTJ-EX-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.08A |
| Base Part Number: | VI-JTJ |
| Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 36V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices used to convert a direct current (DC) voltage into another DC voltage. These converters are used in a variety of applications, including power supplies, industrial processes, automotive systems, and consumer electronics. The VI-JTJ-EX-F4 converter is a high quality, low cost DC-DC converter specifically designed for use in industrial applications.
The VI-JTJ-EX-F4 utilizes a three-stage switching converter topology with a wide input voltage range from 8V to 24V DC. This converter can output a continuous 3A at 5V, 12V, or ±12V and 5A at ±5V and ±15V DC. It is also capable of pulsed current up to 7A for short periods of time. This converter is designed to have a high efficiency rating and is protected from overvoltage, overtemperature and short circuit conditions.
The VI-JTJ-EX-F4 converter can be used in a variety of applications, including industrial controllers, robotics, microprocessor-based control systems, and audio systems. It is also widely used in automotive applications such as headlights, horns, fuel injectors, and ECUs. In industrial applications, the VI-JTJ-EX-F4 converter can be used to supply power to sensors, actuators, and communications equipment.
The working principle of the VI-JTJ-EX-F4 converter is similar to that of other DC-DC converters. Input voltage is supplied to the converter, which is then transformed into a higher or lower voltage output. Heat is produced during this transformation process and must be dissipated with a heat sink or fan. The output voltage produced by the VI-JTJ-EX-F4 converter is regulated to maintain a constant voltage level.
The VI-JTJ-EX-F4 converter is a reliable, cost-effective power solution for industrial applications. It offers a high efficiency rating, a wide input voltage range, and built-in protection against over-voltage, over-temperature conditions, and short circuit conditions. Its three-stage switching converter topology and regulated output make it an ideal choice for industrial controllers, robotics, and audio systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...