VI-JTV-CY-F2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic components that convert input characteristics such as voltage and current to output characteristics such as voltage and current. A VI-JTV-CY-F2 converter uses the voltage input and current input to create a specific output. This type of converter provides precisely-matched voltage and current outputs to fulfill a variety of power conversion needs.

The VI-JTV-CY-F2 is based on a synchronous rectifier type boost converter topology. This means that the converter contains two power devices, one MOSFET (metal-oxide- semiconductor field effect transistor) and one diode, connected in antiparallel. The two devices are each connected to one of the two main parts of the converter, the high-side and the low-side. In this type of converter, the two power devices are working together when operating in a load range, and are controlled on a cycle-by-cycle basis.

An important feature of the VI-JTV-CY-F2 is its wide input range. It can be powered from an input voltage range between 9.6V and 72V, making it suitable for use in various power requirements. The converter also features a low turn-on voltage and continuous current limit. It typically has a power efficiency of up to 98%, depending on the operating conditions.

When powering a device with the VI-JTV-CY-F2, it needs to be placed in the correct application field. The converter needs to be connected to the input and output terminals of the device in order to work properly. The input voltage and current can be adjusted according to the requirement by pressing the appropriate buttons on the back of the unit. The power output can then be adjusted by manipulating the operating range of the VI-JTV-CY-F2.

The working principle of the VI-JTV-CY-F2 can be explained by understanding the operation of the components in the converter. When electricity is supplied to the converter, the built-in MOSFET and diode turn on and off, respectively, depending on the signal received from the power control IC. This action creates a pulsed voltage output from the converter. The voltage is then controlled by the correction loop, allowing constant voltage and current outputs to be provided.

The VI-JTV-CY-F2 is a highly reliable and efficient device, suitable for a range of applications. This type of converter provides a reliable power output, and is easy to set up and use. It is an excellent choice for powering various electrical and electronic components, such as motors, sensors, and industrial machinery.

The specific data is subject to PDF, and the above content is for reference