VI-JVR-IY-F1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electrical circuits used to convert direct current from one voltage to another. The VI-JVR-IY-F1 is a type of buck-boost converter specifically designed for automotive applications. It allows a wide range of input and output voltages to be chosen, making it an ideal choice for a variety of automotive applications.

The VI-JVR-IY-F1 is also capable of working in high input voltage and low output voltage applications, such as those required to power accessories like headlamps in a vehicle.

The VI-JVR-IY-F1 application field is quite broad, as it is suitable for high voltage sources providing 12 volts or higher, allowing the output voltage to be chosen typically between 6 and 18 volts.

The VI-JVR-IY-F1 buck-boost converter consists of two main components – a buck converter and a boost converter – connected in series. The buck converter reduces the input voltage to a specified level, and the boost converter increases the output voltage accordingly. The voltage level of the output is determined by a regulator, allowing for precise control.

The VI-JVR-IY-F1 buck-boost converter has fewer components and therefore is lighter and more compact when compared to other converters. This makes it ideal for applications where space and weight are important constraints.

The working principle of the VI-JVR-IY-F1 buck-boost converter is fairly simple. The converter utilizes a DC-to- DC converter IC such as the LM2837, which uses two transistors connected in an H-Bridge configuration. The transistors are switched in order to change the polarity of the voltage, allowing current to flow in either direction.

The LM2837 IC also contains two voltage regulators – one for the buck stage and one for the boost stage – which help to ensure that the output is correctly regulated. The regulator for the buck stage ensures that the output voltage is never higher than the input voltage, while the regulator for the boost stage ensures that the output voltage is never lower than the input voltage.

The LM2837 also contains an oscillator that controls the switching of the transistors at the desired frequency. This helps to maintain a stable output voltage and reduce any interference caused by the switching.

The VI-JVR-IY-F1 buck-boost converter is capable of providing up to 3A of current and is designed for input voltages from 8 to 16 volts. It is also designed to be used with automotive electrical systems, where the input voltage can vary significantly due to the charging system. Thus, it is important to have a converter that can compensate for these variations, and the VI-JVR-IY-F1 is designed specifically for this purpose.

The VI-JVR-IY-F1 is a highly efficient buck-boost converter that is ideal for automotive applications, in which wide input and output voltage ranges and high efficiency must be achieved. It’s small size and low weight make it perfect for use in applications where space and weight are considerations.

The specific data is subject to PDF, and the above content is for reference